Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Cordite equivalent - WARNING re IMR3031

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

mauserand9mm
.400 member

Reged: 03/09/09
Posts: 1031
Loc: Queensland, Australia

Re: Cordite equivalent
01/07/10 10:22 AM

The empty space in the case adds to the pressure spike problem. In Graeme Wright's book "Shooting the British Double Rifle" he includes reference to some testing done many years ago where a tube was filled with a small amount of powder and the location/disbursion was varied. Pressure was monitored at different places along the barrel. If the powder was spread uniformly along the tube (even though there was still a large air space) the pressure was uniform throughout the tube If the powder was placed at either end, the pressure spiked at both ends while the pressure was normal in the middle.

Cordite was produced in long strands that went from case end to projectile underside, so a reduced charge didn't appear to suffer the pressure spikes.

Graeme's book includes the effects of different types of fillers and powders etc. I can't say too much without risking copyright issues. And I'm not getting a commission from Graeme for mentioning his book either.

Long throats exacerbate the ignition issues. I've had lots of drama getting reduced loads with cast projectiles to light up reliably in my 458WM (it's a CZ550 magnum). I've managed to get a few projectiles stuck in the barrel on different occassions.

Always be sceptical of any load advice or recommendations given. Publications would be more reliable source and even contacting the powder companies is worth a go.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Cordite equivalent - WARNING re IMR3031	fraserdouble	25/02/09 10:27 PM
Re: Cordite equivalent	grandveneur	26/02/09 03:11 AM
Re: Cordite equivalent	Marrakai	26/02/09 10:45 PM
Re: Cordite equivalent	bonanza	29/06/10 09:35 PM
Re: Cordite equivalent	DarylS	30/06/10 12:45 AM
Re: Cordite equivalent	grandveneur	30/06/10 06:40 PM
Re: Cordite equivalent	mauserand9mm	01/07/10 10:22 AM
Re: Cordite equivalent	grandveneur	01/07/10 03:23 PM
Re: Cordite equivalent	grandveneur	29/06/10 06:17 PM
Re: Cordite equivalent	Ron_Vella	29/06/10 08:47 PM
Re: Cordite equivalent	beleg2	29/06/10 08:59 PM
Re: Cordite equivalent - WARNING re IMR3031	NitroX	29/06/10 08:55 PM
Re: Cordite equivalent	doubleriflenut	26/02/09 02:53 AM

Extra information

0 registered and 72 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12973

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved