Quote:

---

Gatsby

R barrel is 0.727" L is 0.726"
Forcing cone on choke tube, back bored a little.
Choke tubes are straight bored (No choke) extended full rifled 1:32" 0.730" groove
around 0.723" lands ( difficult to measure ) was going to gage it but gage set stops at 0.700

---

Measure your rifled "chokes" with a plug gauge if you have access to them. Your lands measurement seems very close to your bore measurement.

--------------------
"Recoil is insignificant when there is a tiger on the head of your elephant" The Maharaja of Cooch Behar

Post Extras