Home | Ezine | Forums | Links | Contact
NitroExpress.com: .405 winchester double

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

DarylS
.700 member


Reged: 10/08/05
Posts: 27732
Loc: Beautiful British Columbia, Ca...
Re: .405 winchester double
      31/05/10 02:06 AM

Lead/tin alloys will not harden. You need arsnic to cause the hardening process. You can get the requisite arsnic by using bagged shot, or by adding WW alloy to the mix. Be careful not to get WW labeled with a Z in the mix. Zinc is not user friendly and will contaminate the pot as well.
WW of antimony/lead mix can easily be hardened as below.

I used to shoot a mix of 50/50 WW and pure lead in my .50 Alaskan Rolling Block, which oven hardened to Brinel of about 24, (linotype is about Brinel 22) while straight from the mould, non-hardened, shot just as well and expanded like mad. At 1,800fps, there was no leading with non-hardened, 'soft' bullets. I didn't push the soft bullets(brinel 7 or 8) any faster than that. The combination of large bore and low pressure (slow powders) allowed the soft bullet shooting.

50/50 WW and pure should water drop about at about Brinel 20 to 24 - plenty hard enough for anything a DR in .40 or .45 cal will dish out. When I water drop bullets from the mould, I use a 5 gallon can with afolded towel in the bottom. I also have a sheet over the top of the bucket with a slit for the bullets to drop through. You absolutely don't want any splashes of water to enter the lead pot. BLOOOOOM - molten lead everywhere. It burns. I had a mopth fly into my lead pot last year and I wore about 6 pounds of lead. It emptied my 20 pound pot instantly.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by Daryl_S (31/05/10 02:10 AM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .405 winchester double Birdhunter50 24/05/10 10:30 PM
. * * Re: .405 winchester double bonanza   25/05/10 10:54 AM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:31 AM
. * * Re: .405 winchester double Rolland   25/05/10 02:46 PM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:42 AM
. * * Re: .405 winchester double BlainSmipy   28/05/10 06:06 AM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:49 AM
. * * Re: .405 winchester double bonanza   28/05/10 10:23 PM
. * * Re: .405 winchester double Paul   29/05/10 12:28 AM
. * * Re: .405 winchester double Birdhunter50   30/05/10 11:47 PM
. * * Re: .405 winchester double DarylS   29/05/10 02:30 AM
. * * Re: .405 winchester double Birdhunter50   31/05/10 12:10 AM
. * * Re: .405 winchester double BlainSmipy   30/05/10 12:28 AM
. * * Re: .405 winchester double Birdhunter50   31/05/10 12:25 AM
. * * Re: .405 winchester double BlainSmipy   31/05/10 01:02 AM
. * * Re: .405 winchester double DarylS   31/05/10 02:06 AM
. * * Re: .405 winchester double Birdhunter50   05/06/10 08:53 AM
. * * Re: .405 winchester double Paul   08/06/10 12:40 AM
. * * Re: .405 winchester double Birdhunter50   08/06/10 08:12 AM
. * * Re: .405 winchester double Paul   09/06/10 12:29 AM
. * * Re: .405 winchester double DarylS   06/06/10 12:08 AM
. * * Re: .405 winchester double CptCurlAdministrator   06/06/10 12:25 AM
. * * Re: .405 winchester double DarylS   09/06/10 03:45 AM
. * * Re: .405 winchester double CptCurlAdministrator   09/06/10 06:35 AM
. * * Re: .405 winchester double mehulkamdar   25/05/10 08:46 AM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:41 AM
. * * Re: .405 winchester double tarawa   24/05/10 11:30 PM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:34 AM
. * * Re: .405 winchester double whitey   25/05/10 12:52 AM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:36 AM
. * * Re: .405 winchester double DarylS   25/05/10 07:01 AM
. * * Re: .405 winchester double Birdhunter50   28/05/10 10:38 AM

Extra information
0 registered and 3 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4847

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved