Home | Ezine | Forums | Links | Contact
NitroExpress.com: M03 Mauser Questions

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

404bearslayer
.300 member


Reged: 28/04/09
Posts: 226
Loc: Germany
Re: M03 Mauser Questions
      30/05/10 12:57 AM


EricD,

I have a M03 in .300WM as well (the fluted match barrel). With handloads, you can in deed get benchrest gun accuracy. Got best results with 168 grain Berger VLD bullets at 2995 f/s (H 4813 with RWS Magnum Primers -nice practice load) and 210 grain Berger VLD bullets also at 2995 f/s (Norma MRP-2 with Fed 215 primer - very hard-hitting hunting load). Both loads shoot hole-in-hole at 100 meters. Brass was Lapua, which is the only brass that I would use for the 210 grain load at that speed, as it has a case volume approaching a .300 Whetherby (although Norma cases have a big case voume as well, I think. Remington .300WM cases have the smallest volume, by the way, I would stay away from these). Unfortunately, .300 WM cases have been discontunued by Lapua a while ago, luckily I bought a life-time supply.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* M03 Mauser Questions Empire375 17/05/10 04:48 PM
. * * Re: M03 Mauser Questions Rolf   17/05/10 08:35 PM
. * * Re: M03 Mauser Questions EricD   18/05/10 04:43 AM
. * * Re: M03 Mauser Questions Empire375   18/05/10 07:53 PM
. * * Re: M03 Mauser Questions 404bearslayer   30/05/10 12:57 AM
. * * Re: M03 Mauser Questions EricD   17/05/10 05:27 PM

Extra information
0 registered and 238 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3476

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved