Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 9x57 mauser bullets

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Kiwi_bloke
.333 member

Reged: 03/09/09
Posts: 256
Loc: New Zealand

Re: 9x57 mauser bullets
20/05/10 07:28 AM

If the factory bullet slides freely in a fired case neck, then you have no neck issues. If not, you might be able to correct it with a slightly larger expander.

It's my policy also to expand necks oversize and then size then down a bit at a time until the bolt closes with a light resistance. This is especially important if you spot, for instance, that the primer has partly backed out of the case after firing. It's filling the excess headspace. I used C-H tapered expanders to over-expand.

If the necks split on expanding, (not likely but possible), you can either accept the failure rate, try another brand of case or anneal first. I use moulten lead, 5 seconds MAX - NECK AND SHOULDERS ONLY. The way to ensure only these get treated is to have a shallow tray of moulten lead. A lead shotmaker was ideal for me. I also made up a heat-sink, being a thick block of brass with a case sized hole in the middle. This was then cut in half and each half mounted by a thread to a vice-grip jaw. Case's that had been treated could then be quick-released into a bucket of water to stop any further heat transfer to the case body or head especially. You must leave the SPENT primer in, by the way, when you do this.

My bore was .358 and Hornady bullets in that caliber worked very well. I never used a pistol bullet to fire-form. The 9x57 case was originally made from an 8x57 Mauser and I would think they're close enough, (see cartridge drawings available on the net), that one will make the other.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
9x57 mauser bullets	GSP7	07/05/10 01:33 PM
Re: 9x57 mauser bullets	eagle27	07/05/10 03:30 PM
Re: 9x57 mauser bullets	GSP7	07/05/10 04:21 PM
Re: 9x57 mauser bullets	HuntingSchneider	20/05/10 12:37 PM
Re: 9x57 mauser bullets	lancaster	07/05/10 05:35 PM
Re: 9x57 mauser bullets	xausa	07/05/10 06:46 PM
Re: 9x57 mauser bullets	rglenz	07/05/10 11:32 PM
Re: 9x57 mauser bullets	DarylS	08/05/10 01:39 AM
Re: 9x57 mauser bullets	GSP7	09/05/10 10:50 AM
Re: 9x57 mauser bullets	DarylS	10/05/10 12:42 AM
Re: 9x57 mauser bullets	88MauSporter	10/05/10 05:29 AM
Re: 9x57 mauser bullets	Kiwi_bloke	20/05/10 07:28 AM
Re: 9x57 mauser bullets	Kiwi_bloke	20/05/10 07:29 AM
Re: 9x57 mauser bullets	eagle27	20/05/10 04:15 PM
Re: 9x57 mauser bullets	Kiwi_bloke	20/05/10 07:06 PM
Re: 9x57 mauser bullets	eagle27	20/05/10 07:25 PM
Re: 9x57 mauser bullets	GK	20/05/10 09:29 PM
Re: 9x57 mauser bullets	rglenz	07/05/10 02:11 PM

Extra information

0 registered and 25 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10305

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved