Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Slugged Bore Daniel Fraser 450/450 3 1/4"

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 26866
Loc: Beautiful British Columbia, Ca...

Re: Slugged Bore Daniel Fraser 450/450 3 1/4"
22/04/10 02:20 AM

That sized round ball will give accurate measure as the resulting 'flats' will be plenty long enough - if the measurer is accurate.
Be careful you don't compress the corners of the groove impressions when measuring, as they can compress easily, giving a small measurement. Smaller is better than larger.

Mike - your post said the 'bore' was between .403" and .404" - I take that to mean the 'groove' diameter was between those two measurements.

Lee Precision will make you bullet reducing (sizing) dies for around $25.00 each. mperrial die wax or STOS does a good job for lubing bullets for reducing. I am currently sizing .375" down to .367" in one pass in a die I cobbled, with barely more pressure than FL sizing a large case. those two lubes work well, but some lubes aren't a high enough pressure lube and might stick a bullet.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
Slugged Bore Daniel Fraser 450/450 3 1/4"	577500WR	21/04/10 03:06 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	500Nitro	21/04/10 03:21 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	AkMike	21/04/10 03:51 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	500Nitro	21/04/10 04:04 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	AkMike	21/04/10 04:53 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	4seventy	21/04/10 05:35 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	500Nitro	21/04/10 05:51 PM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	AkMike	22/04/10 12:43 AM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	DarylS	22/04/10 02:20 AM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	577500WR	22/04/10 03:21 AM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	DM	30/04/10 11:03 AM
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"	DarylS	30/04/10 11:50 PM

Extra information

1 registered and 409 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5583

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact