Home | Ezine | Forums | Links | Contact
NitroExpress.com: Slugged Bore Daniel Fraser 450/450 3 1/4"

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

4seventy
Sponsor


Reged: 07/05/03
Posts: 2210
Loc: Queensland Australia
Re: Slugged Bore Daniel Fraser 450/450 3 1/4"
      21/04/10 05:35 PM

With groove measurement, whenever an odd size shows up which appears to be a long way out of spec, I reckon it's a good idea to start again, re-slug both bores, and re-measure.
You also need to be 100% certain that the slug is actually in full contact with the groove diameter, and that the micrometer measurement is taken accurately.

If they really do turn out to be .4035", personally I'd be getting a reducing die made for .408" bullets, to take them down around .404" to .405".

Firstly though, I'd want to be dead sure that the groove measurement is correct.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Slugged Bore Daniel Fraser 450/450 3 1/4" 577500WR 21/04/10 03:06 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" 500Nitro   21/04/10 03:21 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" AkMike   21/04/10 03:51 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" 500Nitro   21/04/10 04:04 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" AkMike   21/04/10 04:53 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" 4seventy   21/04/10 05:35 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" 500Nitro   21/04/10 05:51 PM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" AkMike   22/04/10 12:43 AM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" DarylS   22/04/10 02:20 AM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" 577500WR   22/04/10 03:21 AM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" DM   30/04/10 11:03 AM
. * * Re: Slugged Bore Daniel Fraser 450/450 3 1/4" DarylS   30/04/10 11:50 PM

Extra information
1 registered and 325 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5585

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved