Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 375 x 2-1/2" Nitro Express

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: 375 x 2-1/2" Nitro Express
16/04/10 03:01 AM

Thanks for the welcome and the encouragement. I'll post some pictures just as soon as I get them uploaded to a web site.

I've just ordered a .375 bullet mould from:

http://www.castbulletengineering.com/page003.html

When I get it and I've cast a few I'll post the results. I've never dealt with these people before but they are substanially cheaper than RCBS, Lyman or SAECO when imported into the UK. Thanks to Daryl S. for the advice about filling grease grooves prior to sizing. I'll try that before I get shot of the Lee mould.

Here in the UK Linotype is just about unobtainable, wheelweights are becoming scarce and virgin 50/50 bar solder is very expensive. I did a bit of thinking and came up with pewter as a source of tin. Old pint tankards, particularly if they are dented or engraved with someone's initials can be bought very cheaply (don't tell anyone but usually at less than their scrap value) and will melt down to between 6 and 8 ounces of pewter. Pewter is over 90% tin and is usually alloyed with copper these days rather than lead. I've been using it to produce an alloy of approximately 16:1 and it seems to be performing quite well in pistol calibre carbine loads up to about 1,300 fps. I haven't tried it in my 303 or 375 yet and will try to duplicate Lyman No. 2 metal for that. Anybody got on thoughts on this?

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
375 x 2-1/2" Nitro Express	Metalguy	24/11/09 05:02 AM
Re: 375 x 2-1/2" Nitro Express	davester	29/01/10 01:29 PM
Re: 375 x 2-1/2" Nitro Express	lawndart	29/01/10 04:06 PM
Re: 375 x 2-1/2" Nitro Express	DoubleD	29/01/10 04:55 PM
Re: 375 x 2-1/2" Nitro Express	450_Ackley	30/01/10 02:48 PM
Re: 375 x 2-1/2" Nitro Express	Oldbrit	08/04/10 03:39 AM
Re: 375 x 2-1/2" Nitro Express	mikeh416Rigby	11/04/10 09:33 AM
Re: 375 x 2-1/2" Nitro Express	lancaster	11/04/10 01:57 PM
Re: 375 x 2-1/2" Nitro Express	Oldbrit	16/04/10 03:01 AM
Re: 375 x 2-1/2" Nitro Express	Oldbrit	11/09/10 03:55 AM
Re: 375 x 2-1/2" Nitro Express	tinker	07/04/12 11:40 AM
Re: 375 x 2-1/2" Nitro Express	DarylS	16/04/10 11:50 AM
Re: 375 x 2-1/2" Nitro Express	DarylS	11/04/10 05:56 AM
Re: 375 x 2-1/2" Nitro Express	Con	10/04/10 07:32 AM
Re: 375 x 2-1/2" Nitro Express	DarylS	11/04/10 05:45 AM
Re: 375 x 2-1/2" Nitro Express	500Nitro	24/11/09 05:04 AM
Re: 375 x 2-1/2" Nitro Express	Metalguy	24/11/09 06:09 AM
Re: 375 x 2-1/2" Nitro Express	500Nitro	24/11/09 06:15 AM
Re: 375 x 2-1/2" Nitro Express	AkMike	24/11/09 06:39 AM
Re: 375 x 2-1/2" Nitro Express	88MauSporter	24/11/09 03:01 PM
Re: 375 x 2-1/2" Nitro Express	9.3x57	24/11/09 11:48 PM
Re: 375 x 2-1/2" Nitro Express	DarylS	25/11/09 12:44 AM
Re: 375 x 2-1/2" Nitro Express	simonsaorsa	25/11/09 08:36 AM
Re: 375 x 2-1/2" Nitro Express	Metalguy	25/11/09 02:15 PM
Re: 375 x 2-1/2" Nitro Express	88MauSporter	25/11/09 03:26 PM
Re: 375 x 2-1/2" Nitro Express	Metalguy	26/11/09 12:29 AM
Re: 375 x 2-1/2" Nitro Express	DoubleD	25/11/09 04:26 PM
Re: 375 x 2-1/2" Nitro Express	AkMike	24/11/09 06:08 AM

Extra information

0 registered and 28 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 21203

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved