Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: cast loads in 458WM

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

86thecat
.224 member

Reged: 14/07/05
Posts: 46
Loc: Black Hills SD, USA

Re: cast loads in 458WM
29/03/10 12:55 PM

My CZ 458WM has never seemed to like light bullets but will shoot MOA with 450gn and heavier jacketed or TSX, so just tried some Oregon Trail True Shot 430gn FPGC .459 diameter cast. Worked up to 66 gn of Varget, crimped with a Lee FC in the first lube groove, 3.015 oal, the gas check is touching the powder. Got groups around 1-3/4 inches with point of impact within 2 inches of my go to 450 TSX load (Lott length) at 100 yards. Haven't chronoed them yet but they are stout, primers show some flattening and no ignition problems. Just what I was looking for, reasonably priced practice loads with POI close enough to leave the scope alone. US $22 for a box of 50 bullets, plus shipping. Only fired about 10 rounds today, but this load looks promising in my rifle.

This load was OK in my rifle but do your own research to be safe.

Post Extras

Entire topic
Subject	Posted by	Posted on
cast loads in 458WM	mauserand9mm	07/03/10 09:00 PM
Re: cast loads in 458WM	bonanza	30/04/10 12:49 AM
Re: cast loads in 458WM	mauserand9mm	30/04/10 08:41 PM
Re: cast loads in 458WM	mauserand9mm	17/05/10 01:29 PM
Re: cast loads in 458WM	mauserand9mm	05/11/10 07:59 AM
Re: cast loads in 458WM	DarylS	05/11/10 11:49 AM
Re: cast loads in 458WM	mauserand9mm	05/11/10 09:57 AM
Re: cast loads in 458WM	DarylS	06/11/10 03:32 AM
Re: cast loads in 458WM	VonGruff	06/11/10 05:58 AM
Re: cast loads in 458WM	mauserand9mm	07/11/10 08:39 PM
Re: cast loads in 458WM	Tatume	07/03/10 11:01 PM
Re: cast loads in 458WM	bonanza	08/11/10 03:17 AM
Re: cast loads in 458WM	mauserand9mm	08/03/10 10:30 AM
Re: cast loads in 458WM	Tatume	08/03/10 11:35 PM
Re: cast loads in 458WM	mauserand9mm	09/03/10 11:31 AM
Re: cast loads in 458WM	450_Ackley	09/03/10 04:28 PM
Re: cast loads in 458WM	Tatume	09/03/10 11:12 PM
Re: cast loads in 458WM	DarylS	10/03/10 03:26 AM
Re: cast loads in 458WM	450_Ackley	10/03/10 07:38 AM
Re: cast loads in 458WM	mauserand9mm	10/03/10 11:52 AM
Re: cast loads in 458WM	Tatume	11/03/10 12:24 AM
Re: cast loads in 458WM	DarylS	11/03/10 12:40 PM
Re: cast loads in 458WM	450	11/03/10 04:39 PM
Re: cast loads in 458WM	mauserand9mm	11/03/10 10:19 PM
Re: cast loads in 458WM	DarylS	12/03/10 01:49 AM
Re: cast loads in 458WM	mauserand9mm	12/03/10 11:29 AM
Re: cast loads in 458WM	DarylS	13/03/10 04:00 AM
Re: cast loads in 458WM	Tatume	13/03/10 06:45 AM
Re: cast loads in 458WM	gwindrider1	16/03/10 12:28 PM
Re: cast loads in 458WM	mauserand9mm	18/03/10 11:44 AM
Re: cast loads in 458WM	450_Ackley	18/03/10 07:04 PM
Re: cast loads in 458WM	450	23/03/10 08:24 PM
Re: cast loads in 458WM	DarylS	24/03/10 07:12 AM
Re: cast loads in 458WM	mauserand9mm	24/03/10 01:50 PM
Re: cast loads in 458WM	DarylS	24/03/10 11:19 PM
Re: cast loads in 458WM	mauserand9mm	25/03/10 09:58 AM
Re: cast loads in 458WM	eagle27	25/03/10 05:29 PM
Re: cast loads in 458WM	DarylS	26/03/10 01:00 AM
Re: cast loads in 458WM	greenshoots	26/03/10 06:08 AM
Re: cast loads in 458WM	86thecat	29/03/10 12:55 PM
Re: cast loads in 458WM	mauserand9mm	29/04/10 08:51 PM
Re: cast loads in 458WM	DarylS	29/04/10 10:00 PM
Re: cast loads in 458WM	mauserand9mm	14/03/10 08:43 PM
Re: cast loads in 458WM	eagle27	14/03/10 09:09 PM
Re: cast loads in 458WM	Tatume	14/03/10 10:57 PM
Re: cast loads in 458WM	DarylS	15/03/10 02:52 AM
Re: cast loads in 458WM	mauserand9mm	15/03/10 09:54 AM
Re: cast loads in 458WM	DarylS	15/03/10 10:22 AM
Re: cast loads in 458WM	9dot3x74R	15/03/10 12:19 PM
Re: cast loads in 458WM	DarylS	15/03/10 12:59 PM
Re: cast loads in 458WM	mauserand9mm	15/03/10 02:10 PM
Re: cast loads in 458WM	450_Ackley	15/03/10 06:14 PM
Re: cast loads in 458WM	450	12/03/10 04:56 PM
Re: cast loads in 458WM	DarylS	10/03/10 12:25 PM
Re: cast loads in 458WM	86thecat	10/03/10 05:18 PM
Re: cast loads in 458WM	450_Ackley	08/03/10 02:22 PM
Re: cast loads in 458WM	DarylS	08/03/10 03:25 PM
Re: cast loads in 458WM	mauserand9mm	08/03/10 06:07 PM
Re: cast loads in 458WM	450_Ackley	08/03/10 08:44 PM

Extra information

0 registered and 176 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 24665

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact