Home | Ezine | Forums | Links | Contact
NitroExpress.com: OK so you guys have convinced me !

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 27005
Loc: Beautiful British Columbia, Ca...
Re: OK so you guys have convinced me !
      24/03/10 07:07 AM

Sorry guys - I missed this trhead for a few days(weeks?).

I'm using 14 bore wads in a 16 bore DB Hammered Husky of 1898 vintage with shot loads using MagTec brass. The gun is actually chambered for paper hulls for the shot barrel and brass for the rifled 13 bore tube, which fits circle-fly wads OK.(the chambers are identical, btw. The 14 bore wads are necessary in the 16 bore shot barrel to take up the space in the brass hulls - or, I can use plastics as the chamber is actually 68mm long, without any undue pressure.

I would not worry about using 10 bore wads in the 12 bore magtec cases, but would be on the lookout for paper hulls to allow the use of normal wads. As with any loading, start conservatively watching for any pressure signs.

The primers used in shotgun are usually good for showing this. Pistol primers (used in Mag Tec brass) will not show such pressure signs as they are designed for pressure which could actually blow the gun up, most likely, and therefore are of little or no use in showing pressure in a shotgun.

I would not use balls that are oversized in the smooth portion of the bore.

The cup wads that Tinker (hollowed fiber) and I use (cup of plastic) keep an undersized ball from touching, yet centred in the bore while the wad itself seals hard against the bore's walls, should take the twist of the tubes and impart that spin to the ball for stabilization.

Well, in theory it should work - and does seem to work in my rifled 12 bore pump - using the undersized ball. I've only shot it at 25 to 30 yards and received an inch and a 1/2 hole for 4 shots. At the same range though, my double smoothbore did produce about the same sized groups. I'll need to try this rifled 'camp-gun' out a bit farther to be sure.

Just re-barreled my gopehr .17, so my thoughts are elsewhere for a while. The double rifle/shotgun with it's patched balls and the 12 bore pump will have to wait a bit.

Good luck.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* OK so you guys have convinced me ! nitro450exp 17/02/10 08:50 AM
. * * Re: OK so you guys have convinced me ! DarylS   17/02/10 11:30 AM
. * * Re: OK so you guys have convinced me ! nitro450exp   17/02/10 12:11 PM
. * * Re: OK so you guys have convinced me ! Grenadier   17/02/10 12:31 PM
. * * Re: OK so you guys have convinced me ! nitro450exp   18/02/10 12:04 AM
. * * Re: OK so you guys have convinced me ! nitro450exp   23/03/10 02:06 AM
. * * Re: OK so you guys have convinced me ! DarylS   24/03/10 07:07 AM
. * * Re: OK so you guys have convinced me ! nitro450exp   30/04/10 10:33 PM
. * * Re: OK so you guys have convinced me ! DarylS   30/04/10 11:41 PM
. * * Re: OK so you guys have convinced me ! nitro450exp   25/05/10 12:04 AM

Extra information
0 registered and 63 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5069

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved