Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: cast loads in 458WM

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

mauserand9mm
.400 member

Reged: 03/09/09
Posts: 1040
Loc: Queensland, Australia

Re: cast loads in 458WM
14/03/10 08:43 PM

Okay, reloading last night and at the range today.

I loaded 14rnds with Winchester cases, CCI magnum primers, 42 grains AR2205, no filler, 405gn Hawkesbury River (no GC) seated to the crimping groove and crimped.

All loads went bang. Couldn't seem to hit the target at 100 yards - shooting very high. Moved target back to 50 yards. Out of four shots, two hit the target and both were 100% sideways. Guy next to me had a chrono and he put 3 of my loads across it (in my rifle of course) - 1740fps, 1820fps and 1680fps, or there abouts.

Advice was that I should try seating the projectile further out - the first lot I tried last week, and the ones that went bang and hit the target, went through pointing the right way and left a round hole.

I got home and it was obvious that the Hawkesburys were not meant to go this fast. I did my normal cleaning routine (less the Sweets copper solvent) but haven't got all the lead out of the bore yet - close, but I'll need another session. The patches were black and had slivers of lead on them.

Trailboss was recommended to me and I'm waiting on another guy to donate a small amount to me before I proceed.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
cast loads in 458WM	mauserand9mm	07/03/10 09:00 PM
Re: cast loads in 458WM	bonanza	30/04/10 12:49 AM
Re: cast loads in 458WM	mauserand9mm	30/04/10 08:41 PM
Re: cast loads in 458WM	mauserand9mm	17/05/10 01:29 PM
Re: cast loads in 458WM	mauserand9mm	05/11/10 07:59 AM
Re: cast loads in 458WM	DarylS	05/11/10 11:49 AM
Re: cast loads in 458WM	mauserand9mm	05/11/10 09:57 AM
Re: cast loads in 458WM	DarylS	06/11/10 03:32 AM
Re: cast loads in 458WM	VonGruff	06/11/10 05:58 AM
Re: cast loads in 458WM	mauserand9mm	07/11/10 08:39 PM
Re: cast loads in 458WM	Tatume	07/03/10 11:01 PM
Re: cast loads in 458WM	bonanza	08/11/10 03:17 AM
Re: cast loads in 458WM	mauserand9mm	08/03/10 10:30 AM
Re: cast loads in 458WM	Tatume	08/03/10 11:35 PM
Re: cast loads in 458WM	mauserand9mm	09/03/10 11:31 AM
Re: cast loads in 458WM	450_Ackley	09/03/10 04:28 PM
Re: cast loads in 458WM	Tatume	09/03/10 11:12 PM
Re: cast loads in 458WM	DarylS	10/03/10 03:26 AM
Re: cast loads in 458WM	450_Ackley	10/03/10 07:38 AM
Re: cast loads in 458WM	mauserand9mm	10/03/10 11:52 AM
Re: cast loads in 458WM	Tatume	11/03/10 12:24 AM
Re: cast loads in 458WM	DarylS	11/03/10 12:40 PM
Re: cast loads in 458WM	450	11/03/10 04:39 PM
Re: cast loads in 458WM	mauserand9mm	11/03/10 10:19 PM
Re: cast loads in 458WM	DarylS	12/03/10 01:49 AM
Re: cast loads in 458WM	mauserand9mm	12/03/10 11:29 AM
Re: cast loads in 458WM	DarylS	13/03/10 04:00 AM
Re: cast loads in 458WM	Tatume	13/03/10 06:45 AM
Re: cast loads in 458WM	gwindrider1	16/03/10 12:28 PM
Re: cast loads in 458WM	mauserand9mm	18/03/10 11:44 AM
Re: cast loads in 458WM	450_Ackley	18/03/10 07:04 PM
Re: cast loads in 458WM	450	23/03/10 08:24 PM
Re: cast loads in 458WM	DarylS	24/03/10 07:12 AM
Re: cast loads in 458WM	mauserand9mm	24/03/10 01:50 PM
Re: cast loads in 458WM	DarylS	24/03/10 11:19 PM
Re: cast loads in 458WM	mauserand9mm	25/03/10 09:58 AM
Re: cast loads in 458WM	eagle27	25/03/10 05:29 PM
Re: cast loads in 458WM	DarylS	26/03/10 01:00 AM
Re: cast loads in 458WM	greenshoots	26/03/10 06:08 AM
Re: cast loads in 458WM	86thecat	29/03/10 12:55 PM
Re: cast loads in 458WM	mauserand9mm	29/04/10 08:51 PM
Re: cast loads in 458WM	DarylS	29/04/10 10:00 PM
Re: cast loads in 458WM	mauserand9mm	14/03/10 08:43 PM
Re: cast loads in 458WM	eagle27	14/03/10 09:09 PM
Re: cast loads in 458WM	Tatume	14/03/10 10:57 PM
Re: cast loads in 458WM	DarylS	15/03/10 02:52 AM
Re: cast loads in 458WM	mauserand9mm	15/03/10 09:54 AM
Re: cast loads in 458WM	DarylS	15/03/10 10:22 AM
Re: cast loads in 458WM	9dot3x74R	15/03/10 12:19 PM
Re: cast loads in 458WM	DarylS	15/03/10 12:59 PM
Re: cast loads in 458WM	mauserand9mm	15/03/10 02:10 PM
Re: cast loads in 458WM	450_Ackley	15/03/10 06:14 PM
Re: cast loads in 458WM	450	12/03/10 04:56 PM
Re: cast loads in 458WM	DarylS	10/03/10 12:25 PM
Re: cast loads in 458WM	86thecat	10/03/10 05:18 PM
Re: cast loads in 458WM	450_Ackley	08/03/10 02:22 PM
Re: cast loads in 458WM	DarylS	08/03/10 03:25 PM
Re: cast loads in 458WM	mauserand9mm	08/03/10 06:07 PM
Re: cast loads in 458WM	450_Ackley	08/03/10 08:44 PM

Extra information

0 registered and 162 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 24643

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved