Home | Ezine | Forums | Links | Contact
NitroExpress.com: cast loads in 458WM

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

DarylS
.700 member


Reged: 10/08/05
Posts: 26942
Loc: Beautiful British Columbia, Ca...
Re: cast loads in 458WM
      13/03/10 04:00 AM

Quote:

Yes you could be right, but I've seen a stuck projectile in a 9mm semi-auto pistol - primer only, no powder. Took a suprisingly decent whack on the "ram rod" to knock it back out. 9mm is a reasonable bore size considering also that it was only a small pistol primer that did this.

I'll try it in the 458 when I get home tonight. I have to pull apart 16 remaining cast reloads anyway (for powder and load adjustment) and will try one with primer only and see what happens. This will be without crimp, as per the other reloads I tried.

Maybe the last one that got stuck at the range did burn some of the powder - the change in colour and bunching may have been caused by the heat of some of the powder igniting perhaps?




Sticking a bullet into the throat with only a primer might be different than having the same thing happen with a big rifle case full of powder. The powder, due to it's compressibility, aborbs the energy of the primer and the bullet stays in the throat. I recall having a .458 2" without powder, fire of the primer without moving the bullet. I always used a heavy roll crimp with that rifle, which may have contributed considerably to the bullet not moving.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* cast loads in 458WM mauserand9mm 07/03/10 09:00 PM
. * * Re: cast loads in 458WM bonanza   30/04/10 12:49 AM
. * * Re: cast loads in 458WM mauserand9mm   30/04/10 08:41 PM
. * * Re: cast loads in 458WM mauserand9mm   17/05/10 01:29 PM
. * * Re: cast loads in 458WM mauserand9mm   05/11/10 07:59 AM
. * * Re: cast loads in 458WM DarylS   05/11/10 11:49 AM
. * * Re: cast loads in 458WM mauserand9mm   05/11/10 09:57 AM
. * * Re: cast loads in 458WM DarylS   06/11/10 03:32 AM
. * * Re: cast loads in 458WM VonGruff   06/11/10 05:58 AM
. * * Re: cast loads in 458WM mauserand9mm   07/11/10 08:39 PM
. * * Re: cast loads in 458WM Tatume   07/03/10 11:01 PM
. * * Re: cast loads in 458WM bonanza   08/11/10 03:17 AM
. * * Re: cast loads in 458WM mauserand9mm   08/03/10 10:30 AM
. * * Re: cast loads in 458WM Tatume   08/03/10 11:35 PM
. * * Re: cast loads in 458WM mauserand9mm   09/03/10 11:31 AM
. * * Re: cast loads in 458WM 450_Ackley   09/03/10 04:28 PM
. * * Re: cast loads in 458WM Tatume   09/03/10 11:12 PM
. * * Re: cast loads in 458WM DarylS   10/03/10 03:26 AM
. * * Re: cast loads in 458WM 450_Ackley   10/03/10 07:38 AM
. * * Re: cast loads in 458WM mauserand9mm   10/03/10 11:52 AM
. * * Re: cast loads in 458WM Tatume   11/03/10 12:24 AM
. * * Re: cast loads in 458WM DarylS   11/03/10 12:40 PM
. * * Re: cast loads in 458WM 450   11/03/10 04:39 PM
. * * Re: cast loads in 458WM mauserand9mm   11/03/10 10:19 PM
. * * Re: cast loads in 458WM DarylS   12/03/10 01:49 AM
. * * Re: cast loads in 458WM mauserand9mm   12/03/10 11:29 AM
. * * Re: cast loads in 458WM DarylS   13/03/10 04:00 AM
. * * Re: cast loads in 458WM Tatume   13/03/10 06:45 AM
. * * Re: cast loads in 458WM gwindrider1   16/03/10 12:28 PM
. * * Re: cast loads in 458WM mauserand9mm   18/03/10 11:44 AM
. * * Re: cast loads in 458WM 450_Ackley   18/03/10 07:04 PM
. * * Re: cast loads in 458WM 450   23/03/10 08:24 PM
. * * Re: cast loads in 458WM DarylS   24/03/10 07:12 AM
. * * Re: cast loads in 458WM mauserand9mm   24/03/10 01:50 PM
. * * Re: cast loads in 458WM DarylS   24/03/10 11:19 PM
. * * Re: cast loads in 458WM mauserand9mm   25/03/10 09:58 AM
. * * Re: cast loads in 458WM eagle27   25/03/10 05:29 PM
. * * Re: cast loads in 458WM DarylS   26/03/10 01:00 AM
. * * Re: cast loads in 458WM greenshoots   26/03/10 06:08 AM
. * * Re: cast loads in 458WM 86thecat   29/03/10 12:55 PM
. * * Re: cast loads in 458WM mauserand9mm   29/04/10 08:51 PM
. * * Re: cast loads in 458WM DarylS   29/04/10 10:00 PM
. * * Re: cast loads in 458WM mauserand9mm   14/03/10 08:43 PM
. * * Re: cast loads in 458WM eagle27   14/03/10 09:09 PM
. * * Re: cast loads in 458WM Tatume   14/03/10 10:57 PM
. * * Re: cast loads in 458WM DarylS   15/03/10 02:52 AM
. * * Re: cast loads in 458WM mauserand9mm   15/03/10 09:54 AM
. * * Re: cast loads in 458WM DarylS   15/03/10 10:22 AM
. * * Re: cast loads in 458WM 9dot3x74R   15/03/10 12:19 PM
. * * Re: cast loads in 458WM DarylS   15/03/10 12:59 PM
. * * Re: cast loads in 458WM mauserand9mm   15/03/10 02:10 PM
. * * Re: cast loads in 458WM 450_Ackley   15/03/10 06:14 PM
. * * Re: cast loads in 458WM 450   12/03/10 04:56 PM
. * * Re: cast loads in 458WM DarylS   10/03/10 12:25 PM
. * * Re: cast loads in 458WM 86thecat   10/03/10 05:18 PM
. * * Re: cast loads in 458WM 450_Ackley   08/03/10 02:22 PM
. * * Re: cast loads in 458WM DarylS   08/03/10 03:25 PM
. * * Re: cast loads in 458WM mauserand9mm   08/03/10 06:07 PM
. * * Re: cast loads in 458WM 450_Ackley   08/03/10 08:44 PM

Extra information
0 registered and 31 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 24493

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved