Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Small Ring Conversion questions_1

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

kuduae
.400 member

Reged: 13/01/10
Posts: 1792
Loc: middle of Germany

Re: Small Ring Conversion questions and Chamber Pressure
12/02/10 03:38 AM

Sorry, Dons, but this really is an original Mauser commercial transitional action! Why:
First photo: There is no bolt sleeve locking plunger or it's housing on the left side of the bolt sleeve! This alone says it is not a "full developed" M98 action. Also note the long commercial firing pin nut and the teardrop shape of the bolthandle.
Second from top: You can see the Mauser serial # stamped at right angle to the receiver behind the recoil lug. This is Mauser's typical location for the serial # as stamped on all commercial actions sold as "action only" or "barreled action" to other makers like S&S, Rigby, H&H or Westley-Richards!
Photo 4: here I can make out the typical location of the Mauser # on the top rear wall of the magazine. More often than not these serial numbers and their location are the only means to identify a commercial Mauser Oberndorf action used by other gunmakers.
Photos 2,4,5: Here you see the typical Mauser factory set trigger arrangement with it's housing machined integral, no separate housing. Also note Mauser's long set trigger mainspring. All aftermarket dst arrangements used a separate housing, pinned to the triggerguard.
Photo 2: Early Mausers all came from the factory with the military floorplate and release. The Suhl gunmakers often reshaped the larger-than-military trigger guard and they first installed the floorplate release lever, only later adopted by Mauser and perfected with a hinged floorplate.
All in all, this is a typical example of an early commercial transitional action!
I strongly recommend reading Jon Speed's "Mauser Original Oberndorf Sporting Rifles"!
BTW, I know a very early 9.3x62 on an identical Mauser transitional action with the same bottom metal treatment. As it is the typical pre-WW1 Suhl style with ribbed,half-octagon barrel, side-clips and wedge schnabel foreend,fully engraved, probably made in, at least proofed before 1912 in Suhl, but retailed by W. Foerster, Berlin. It is still going strong after 100 years!

--------------------
German foresters: We like sustainability! For merely 300 years by 2013.

Edited by kuduae (12/02/10 04:07 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Small Ring Conversion questions_1	Sauercollector	04/02/10 07:16 AM
Re: Small Ring Conversion questions_1	Sauercollector	11/02/10 12:10 PM
Re: Small Ring Conversion questions_1	dons	11/02/10 12:57 PM
Re: Small Ring Conversion questions_1	mauserand9mm	11/02/10 01:34 PM
Re: Small Ring Conversion questions_1	dons	05/02/10 12:07 AM
Re: Small Ring Conversion questions_1	kuduae	05/02/10 09:13 AM
Re: Small Ring Conversion questions_1	Altamaha	06/02/10 07:51 AM
Re: Small Ring Conversion questions_1	kuduae	06/02/10 08:21 AM
Re: Small Ring Conversion questions_1	Altamaha	06/02/10 08:36 AM
Re: Small Ring Conversion questions_1	tophet1	06/02/10 09:51 AM
Re: Small Ring Conversion questions_1	kuduae	06/02/10 11:15 AM
Re: Small Ring Conversion questions and Chamber Pressure	Altamaha	07/02/10 01:34 AM
Re: Small Ring Conversion questions and Chamber Pressure	Grenadier	07/02/10 01:48 AM
Re: Small Ring Conversion questions and Chamber Pressure	Altamaha	07/02/10 03:13 AM
Re: Small Ring Conversion questions and Chamber Pressure	DarylS	07/02/10 06:26 AM
Re: Small Ring Conversion questions and Chamber Pressure	Altamaha	07/02/10 06:50 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	08/02/10 03:23 AM
Re: Small Ring Conversion questions and Chamber Pressure	DarylS	12/02/10 02:36 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	12/02/10 03:38 AM
Re: Small Ring Conversion questions and Chamber Pressure	dons	12/02/10 08:38 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	12/02/10 10:00 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	12/02/10 10:24 AM
Re: Small Ring Conversion questions and Chamber Pressure	Sauercollector	12/02/10 07:58 PM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	13/02/10 12:33 AM
Re: Small Ring Conversion questions and Chamber Pressure	450_366	12/02/10 04:18 AM
Re: Small Ring Conversion and Stock Pentagraph service?	Sauercollector	03/03/10 06:58 AM
Re: Small Ring Conversion questions and Chamber Pressure	Sauercollector	13/02/10 04:57 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	13/02/10 08:29 AM
Re: Small Ring Conversion questions and Chamber Pressure	dons	13/02/10 01:22 PM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	13/02/10 09:06 PM
Re: Small Ring Conversion questions and Chamber Pressure	lancaster	14/02/10 01:18 AM
Re: Small Ring Conversion questions and Chamber Pressure	dons	14/02/10 07:33 AM
Re: Small Ring Conversion questions and Chamber Pressure	lancaster	14/02/10 07:46 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	14/02/10 10:54 PM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	12/02/10 05:13 AM
Re: Small Ring Conversion questions and Chamber Pressure	Sauercollector	08/02/10 06:34 AM
Re: Small Ring Conversion questions and Chamber Pressure	tophet1	08/02/10 07:36 AM
Re: Small Ring Conversion questions and Chamber Pressure	kuduae	08/02/10 08:22 AM
Re: Small Ring Conversion questions and Chamber Pressure	Sauercollector	09/02/10 05:32 AM
Re: Small Ring Conversion questions_1	Bramble	04/02/10 11:36 AM

Extra information

0 registered and 10 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 17721

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved