Home | Ezine | Forums | Links | Contact
NitroExpress.com: 510 Wells Build Questions

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Rolf
.333 member


Reged: 26/02/07
Posts: 402
Loc: Germany, Bavaria
Re: 510 Wells Build Questions
      08/02/10 10:59 PM

Cameron,
Gentlemen,

please find below the measured dimensions and information about my Heym Expres in .500 A-Square.

best regards
Rolf

Heym Express rifle

The rifle was aquired in 1991.
All metal parts steel, exterieur parts bead blasted and parkerized.

caliber: .500 A-Square
total length: 116 cm
total weight: 4,6 kg
system: Mauser 98 Magnum (improved, new production of 1990)
controlled round feed, firing pin assembly consists of two parts: a spring tension loaded steel rod for transmitting the strike and the real firing pin; (an additional firing pin is stored in the chamber in the pistol grip)

safety: horizontal 3 position safety, blocking the firing pin
standard trigger, letoff at ca. 1200 grams, crisp

barrel: 610mm / ca. 24”, no muzzle break nor mangna-port
twist: 254 mm = 1 : 10”

barrel dimensions: dia. 31,0mm at the system, cylindrical for 35mm length from system interface toward the muzzle, then tapering to muzzle dia. 21,5mm

magzine box: milled magazine box, capacity 4 cartridges in two rows
inner length 96,5mm, with milled cartridge shoulder stop
floorplate to open with a latch in the trigger guard

sights: system with two flat areas on the upper side, each prepared with 2 threaded bore holes for telescopic sight mount (not used at my rifle), all holes closed with headless screws
front sight: white round front sight, dia 4,0mm, massive steel part
rear sight: massive steel, one standing shallow express leaf marked “50m”,
two folding leafes marked “100m” and “200m”,centerline engraved
distance from rear sight to front sight: 420mm

strap fixing: steel ring over barrel, soldered to barrel; and steel screw in stock

wood: plain walnut stock, enforced with glass bedding and two crossbolts,
rear end of stock covered with pachmayer recoil pad, ca. 43mm wide

balance point: at the interface between barrel and system (rifle unloaded)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 510 Wells Build Questions hansol 25/01/10 04:57 PM
. * * Re: 510 Wells Build Questions 450_Ackley   25/01/10 05:18 PM
. * * Re: 510 Wells Build Questions Altamaha   26/01/10 12:37 PM
. * * Re: 510 Wells Build Questions hansol   26/01/10 01:35 PM
. * * Re: 510 Wells Build Questions Altamaha   27/01/10 04:23 AM
. * * Re: 510 Wells Build Questions hansol   30/01/10 09:49 AM
. * * Re: 510 Wells Build Questions Altamaha   30/01/10 02:21 PM
. * * Re: 510 Wells Build Questions 450_Ackley   30/01/10 02:43 PM
. * * Re: 510 Wells Build Questions 500Nitro   30/01/10 03:01 PM
. * * Re: 510 Wells Build Questions xausa   30/01/10 05:30 PM
. * * Re: 510 Wells Build Questions Altamaha   01/02/10 04:18 PM
. * * Re: 510 Wells Build Questions Altamaha   02/02/10 07:38 AM
. * * Re: 510 Wells Build Questions hansol   02/02/10 08:31 AM
. * * Re: 510 Wells Build Questions Altamaha   02/02/10 09:22 AM
. * * Re: 510 Wells Build Questions Altamaha   02/02/10 02:04 PM
. * * Re: 510 Wells Build Questions xausa   02/02/10 11:44 PM
. * * Re: 510 Wells Build Questions Altamaha   03/02/10 02:24 AM
. * * Re: 510 Wells Build Questions Rolf   03/02/10 11:51 PM
. * * Re: 510 Wells Build Questions Rolf   08/02/10 10:59 PM
. * * Re: 510 Wells Build Questions hansol   09/02/10 04:41 PM
. * * Re: 510 Wells Build Questions Rolf   09/02/10 09:50 PM
. * * Re: 510 Wells Build Questions Paul   10/02/10 12:01 AM
. * * Re: 510 Wells Build Questions xausa   10/02/10 12:28 AM
. * * Re: 510 Wells Build Questions Paul   10/02/10 06:38 PM
. * * Re: 510 Wells Build Questions hansol   11/02/10 10:15 AM
. * * Re: 510 Wells Build Questions hansol   03/02/10 07:33 PM
. * * Re: 510 Wells Build Questions Rolf   02/02/10 10:16 PM
. * * Re: 510 Wells Build Questions hansol   30/01/10 06:04 PM
. * * Re: 510 Wells Build Questions Homer   30/01/10 07:19 PM
. * * Re: 510 Wells Build Questions Altamaha   31/01/10 03:25 AM
. * * Re: 510 Wells Build Questions 450_Ackley   31/01/10 08:37 AM
. * * Re: 510 Wells Build Questions chuck375   31/01/10 10:23 AM
. * * Re: 510 Wells Build Questions Altamaha   01/02/10 02:56 PM
. * * Re: 510 Wells Build Questions chuck375   01/02/10 03:19 PM
. * * Re: 510 Wells Build Questions Altamaha   01/02/10 03:23 PM
. * * Re: 510 Wells Build Questions Altamaha   01/02/10 02:47 PM
. * * Re: 510 Wells Build Questions 500grains   31/01/10 04:43 AM
. * * Re: 510 Wells Build Questions Altamaha   31/01/10 06:42 AM
. * * Re: 510 Wells Build Questions 500Nitro   30/01/10 09:50 AM
. * * Re: 510 Wells Build Questions hansol   26/01/10 02:32 AM
. * * Re: 510 Wells Build Questions 450_Ackley   26/01/10 08:31 AM
. * * Re: 510 Wells Build Questions Altamaha   26/01/10 09:41 AM

Extra information
0 registered and 135 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 24559

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved