Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 416 Taylor project done!

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...

Re: 416 Taylor project done!
27/01/10 02:45 AM

TKS Fatboy - I've and thousands and thousands of rounds. I do partical full length size some calibres though, only sizing enough of the neck to hold the bullet.

My .375/06IMP runs 2,470fps with 300's and 2,675fps with 270's, H4895 and BLC2 being the powders of choice. Both of these bullet weights exceeds 1912 .375H&H bllistics and the 270gr. load duplicates actual modern factory 270gr. for the H&H.

My 9.3x62 also duplicates these ballistics as it has identical case capacity to my .375/06IMP case.

Neither have ever been more than neck sized, same as everything else I've ever shot.

Full length sizing is a recipe for head separations in most calibres by people who do not totally understand what they are actually doing.

Belted cases are the worse for short case life due to lousy headspace tolerances in both brass and chambers.

Head separations only happen in modern cases due to excessive headspace - the rifle's chamber, or caused by the loader shoving the shoulder back.

I have never had cases get tight in the chamber and need to be bumped or FL sized. It has never happened to me. Some rifles I have and have had, had over 6,500 rounds through them, only ever neck sized.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Edited by Daryl_S (27/01/10 02:50 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
416 Taylor project done!	450_Ackley	22/01/10 06:45 PM
Re: 416 Taylor project done!	bonanza	27/01/10 03:14 AM
Re: 416 Taylor project done!	DarylS	27/01/10 02:54 PM
Re: 416 Taylor project done!	450_Ackley	03/02/10 07:41 AM
Re: 416 Taylor project done!	4seventy	03/02/10 08:50 AM
Re: 416 Taylor project done!	Homer	03/02/10 07:34 PM
Re: 416 Taylor project done!	450_Ackley	03/02/10 08:54 PM
Re: 416 Taylor project done!	DarylS	04/02/10 04:32 AM
Re: 416 Taylor project done!	4seventy	04/02/10 04:14 PM
Re: 416 Taylor project done!	DarylS	05/02/10 01:58 AM
Re: 416 Taylor project done!	4seventy	05/02/10 08:34 AM
Re: 416 Taylor project done!	DarylS	06/02/10 04:15 AM
Re: 416 Taylor project done!	Ripp	24/01/10 04:32 AM
Re: 416 Taylor project done!	gryphon	24/01/10 05:30 AM
Re: 416 Taylor project done!	FATBOY404	24/01/10 06:00 AM
Re: 416 Taylor project done!	450_Ackley	24/01/10 08:26 AM
Re: 416 Taylor project done!	Homer	25/01/10 09:17 AM
Re: 416 Taylor project done!	DarylS	25/01/10 11:19 AM
Re: 416 Taylor project done!	450_Ackley	25/01/10 04:31 PM
Re: 416 Taylor project done!	FATBOY404	25/01/10 05:14 PM
Re: 416 Taylor project done!	Reggie	04/03/10 05:15 AM
Re: 416 Taylor project done!	450_Ackley	25/01/10 05:37 PM
Re: 416 Taylor project done!	FATBOY404	25/01/10 07:41 PM
Re: 416 Taylor project done!	DarylS	26/01/10 03:34 AM
Re: 416 Taylor project done!	FATBOY404	26/01/10 07:29 AM
Re: 416 Taylor project done!	Homer	26/01/10 08:41 AM
Re: 416 Taylor project done!	DarylS	27/01/10 02:45 AM
Re: 416 Taylor project done!	tophet1	22/01/10 06:54 PM
Re: 416 Taylor project done!	FATBOY404	22/01/10 07:13 PM
Re: 416 Taylor project done!	450_Ackley	22/01/10 08:28 PM
Re: 416 Taylor project done!	FATBOY404	22/01/10 09:19 PM
Re: 416 Taylor project done!	CptCurl	22/01/10 10:28 PM
Re: 416 Taylor project done!	450_Ackley	23/01/10 06:12 AM
Re: 416 Taylor project done!	Homer	23/01/10 09:44 AM
Re: 416 Taylor project done!	FATBOY404	23/01/10 06:31 PM
Re: 416 Taylor project done!	450_Ackley	23/01/10 08:04 PM
Re: 416 Taylor project done!	FATBOY404	23/01/10 08:09 PM
Re: 416 Taylor project done!	450_Ackley	23/01/10 09:42 PM
Re: 416 Taylor project done!	DarylS	24/01/10 04:16 AM
Re: 416 Taylor project done!	DarylS	23/01/10 03:22 AM

Extra information

0 registered and 96 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 15687

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved