Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 416 Taylor project done!

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

450_Ackley
.375 member

Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia

Re: 416 Taylor project done!
23/01/10 08:04 PM

Neale,
Glad you like the stock Darryl's got underway, I was pretty sure it should have been OK for you.

Took the 416 out to the range this morning to run it in and chrono a few rounds. did the usual 1 shot and clean for 5 rounds, then got into some 3 shot groups and then a clean.
AR 2208 seems the best for group size at present, with 3 shots about an inch, not fantastic, but OK. I'm pretty sure I can get it to go a bit better yet. Projectile used was a 400 grain Woodleigh, the 2208 loads chronographed at 2150 fps, but were really mild, plenty to go yet if needed.
RL 15 was the surprise though, 70 grains of it got the Woodleighs doing 2300 fps, again very mild, groups about 1.25", which I don't think is anywhere good enough, but still have a lot of fiddling to go yet.

David.

Post Extras

Entire topic
Subject	Posted by	Posted on
416 Taylor project done!	450_Ackley	22/01/10 06:45 PM
Re: 416 Taylor project done!	bonanza	27/01/10 03:14 AM
Re: 416 Taylor project done!	DarylS	27/01/10 02:54 PM
Re: 416 Taylor project done!	450_Ackley	03/02/10 07:41 AM
Re: 416 Taylor project done!	4seventy	03/02/10 08:50 AM
Re: 416 Taylor project done!	Homer	03/02/10 07:34 PM
Re: 416 Taylor project done!	450_Ackley	03/02/10 08:54 PM
Re: 416 Taylor project done!	DarylS	04/02/10 04:32 AM
Re: 416 Taylor project done!	4seventy	04/02/10 04:14 PM
Re: 416 Taylor project done!	DarylS	05/02/10 01:58 AM
Re: 416 Taylor project done!	4seventy	05/02/10 08:34 AM
Re: 416 Taylor project done!	DarylS	06/02/10 04:15 AM
Re: 416 Taylor project done!	Ripp	24/01/10 04:32 AM
Re: 416 Taylor project done!	gryphon	24/01/10 05:30 AM
Re: 416 Taylor project done!	FATBOY404	24/01/10 06:00 AM
Re: 416 Taylor project done!	450_Ackley	24/01/10 08:26 AM
Re: 416 Taylor project done!	Homer	25/01/10 09:17 AM
Re: 416 Taylor project done!	DarylS	25/01/10 11:19 AM
Re: 416 Taylor project done!	450_Ackley	25/01/10 04:31 PM
Re: 416 Taylor project done!	FATBOY404	25/01/10 05:14 PM
Re: 416 Taylor project done!	Reggie	04/03/10 05:15 AM
Re: 416 Taylor project done!	450_Ackley	25/01/10 05:37 PM
Re: 416 Taylor project done!	FATBOY404	25/01/10 07:41 PM
Re: 416 Taylor project done!	DarylS	26/01/10 03:34 AM
Re: 416 Taylor project done!	FATBOY404	26/01/10 07:29 AM
Re: 416 Taylor project done!	Homer	26/01/10 08:41 AM
Re: 416 Taylor project done!	DarylS	27/01/10 02:45 AM
Re: 416 Taylor project done!	tophet1	22/01/10 06:54 PM
Re: 416 Taylor project done!	FATBOY404	22/01/10 07:13 PM
Re: 416 Taylor project done!	450_Ackley	22/01/10 08:28 PM
Re: 416 Taylor project done!	FATBOY404	22/01/10 09:19 PM
Re: 416 Taylor project done!	CptCurl	22/01/10 10:28 PM
Re: 416 Taylor project done!	450_Ackley	23/01/10 06:12 AM
Re: 416 Taylor project done!	Homer	23/01/10 09:44 AM
Re: 416 Taylor project done!	FATBOY404	23/01/10 06:31 PM
Re: 416 Taylor project done!	450_Ackley	23/01/10 08:04 PM
Re: 416 Taylor project done!	FATBOY404	23/01/10 08:09 PM
Re: 416 Taylor project done!	450_Ackley	23/01/10 09:42 PM
Re: 416 Taylor project done!	DarylS	24/01/10 04:16 AM
Re: 416 Taylor project done!	DarylS	23/01/10 03:22 AM

Extra information

0 registered and 94 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 15687

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact