Home | Ezine | Forums | Links | Contact
NitroExpress.com: A.Robertson&Son .500/450#1BPE hammer dr

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: A.Robertson&Son .500/450#1BPE hammer dr
      17/01/10 07:26 AM

I agree too to your objections to that Simmons 2.5x bamboo scope! I had reasons for using it: Mounting a regular eye relief scope like a Zielklein on a hammer double is a bum idea IMHO. Either you mount it too high for fast use or it blocks access to the left hammer. I have never seen a Noske here in Germany. I thought I needed a low mounted, longer eye relief scope so the ocular end is forward of the hammers. Granted, a Voigtlaender Skopar D 3x like the one on my Haenel 1900 would have been better, but 18 years ago I did not even know such a thing existed.
http://i1018.photobucket.com/albums/af303/kuduae/1900mSkoparD2.jpg
That Simmons was the only such scope available to me then, and the Warne mounts were the lowest qd mounts with the least obvious bases I could think of. Properly fitting another scope would require different mounts with windage adjustment and bases in different positions. As I believe in "Never repair anything that works", the less than perfect setup remained to this day.
This is rather a topic for the gunsmithing forum, but as you asked:
I made and fitted a larger hinge pin to tighten the action.
When the rifle came my way the muzzles looked like the thing was stored muzzle-down in a flooded room. so the useless part of the barrels had to go. I cut off the barrels and recrowned them. Next I developed a load with proper ballistics that gave acceptable individual groups. Then I made a makeshift adjusting clamp for the muzzles, filed a new regulating wedge, wound barrels and ribs with wire and so on, resoldered and adjusted the forward third of the barrels. Next time at the range, I shot a right-left 6 shot group. Repeated the process 3 times until both barrels shot together at 100meters. Last, I rust blued the barrels. Getting the rifle to full using condition took the better part of a year. Regulating a double is neither a lost art nor a trade secret, but merely a tedious and sometimes frustrating game of patience!I myself have reregulated 11 doubles by now, 5 by resoldering and 6 by load development.

--------------------
German foresters: We like sustainability! For merely 300 years by 2013.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* A.Robertson&Son .500/450#1BPE hammer dr kuduae 16/01/10 11:58 PM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr mehulkamdar   18/01/10 10:57 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr kuduae   18/01/10 11:41 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr CptCurlAdministrator   19/01/10 12:20 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr TH44   19/01/10 11:07 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr m4220   19/01/10 12:26 PM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr CptCurlAdministrator   19/01/10 02:24 PM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr CptCurlAdministrator   19/01/10 02:30 PM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr m4220   19/01/10 03:20 PM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr CptCurlAdministrator   20/01/10 03:28 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr belgmart   24/01/10 01:21 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr Bramble   17/01/10 01:04 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr xausa   17/01/10 02:48 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr kuduae   17/01/10 07:26 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr Bramble   17/01/10 07:47 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr crkennedy1   17/01/10 01:19 PM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr kuduae   18/01/10 02:15 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr DarylS   18/01/10 04:22 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr rigbymauser   17/01/10 04:37 AM
. * * Re: A.Robertson&Son .500/450#1BPE hammer dr CptCurlAdministrator   17/01/10 01:00 AM

Extra information
0 registered and 32 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12728

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved