Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Question for the gunsmiths Pro and Am`s

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Question for the gunsmiths Pro and Am`s
14/01/10 03:42 AM

If you're chiefly concerned about safety, the only important factor is the amount of neck clearance in the chamber. If the neck portion of the chamber is of sufficient diameter to allow the cartridge case neck to expand and release the bullet, such a minor difference in bullet/groove diameter should cause no problem.

After I had the neck of my wildcat .505 chamber opened up to provide sufficient neck clearance for the cartridge case, I routinely shot .510" bullets through my .505 barrel, which measures .495" in the bore and .505" in the groove. At the time, the only .505" bullets obtainable were the Barnes copper tubing bullets. They were not satisfactory. John Buhmiller used to say that a Barnes copper tubing solid made a good soft point.

Just out of curiosity, I once shot a wildebeest with one of the Barnes softs. The bullet hit him in the shoulder, knocked him down, he got up and walked a few steps, then collapsed. We were only able to recover fragments of the bullet, which had come to pieces upon hitting the shoulder.

.505 Gibbs being a proprietary cartridge, Kynoch would not sell the componants. They would sell the 570 grain .510" bullets for the .500 Nitro Express

The elephants and buffalo never complained about it, and the accuracy was unchanged.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Question for the gunsmiths Pro and Am`s	gryphon	13/01/10 08:08 PM
Re: Question for the gunsmiths Pro and Am`s	xausa	14/01/10 03:42 AM
Re: Question for the gunsmiths Pro and Am`s	Bramble	14/01/10 05:45 AM
Re: Question for the gunsmiths Pro and Am`s	AFRO408	15/01/10 08:36 AM
Re: Question for the gunsmiths Pro and Am`s	4seventy	13/01/10 09:03 PM
Re: Question for the gunsmiths Pro and Am`s	450_Ackley	13/01/10 09:24 PM
Re: Question for the gunsmiths Pro and Am`s	gryphon	13/01/10 09:51 PM
Re: Question for the gunsmiths Pro and Am`s	500Nitro	13/01/10 10:04 PM
Re: Question for the gunsmiths Pro and Am`s	450_366	13/01/10 10:08 PM
Re: Question for the gunsmiths Pro and Am`s	gryphon	13/01/10 10:21 PM
Re: Question for the gunsmiths Pro and Am`s	450_366	13/01/10 10:37 PM
Re: Question for the gunsmiths Pro and Am`s	gryphon	13/01/10 10:52 PM
Re: Question for the gunsmiths Pro and Am`s	450_366	13/01/10 10:59 PM
Re: Question for the gunsmiths Pro and Am`s	4seventy	13/01/10 10:56 PM
Re: Question for the gunsmiths Pro and Am`s	500Nitro	13/01/10 09:48 PM
Re: Question for the gunsmiths Pro and Am`s	4seventy	13/01/10 11:06 PM
Re: Question for the gunsmiths Pro and Am`s	500Nitro	15/01/10 08:44 AM
Re: Question for the gunsmiths Pro and Am`s	Homer	15/01/10 12:46 PM
Re: Question for the gunsmiths Pro and Am`s	450_Ackley	15/01/10 01:27 PM
Re: Question for the gunsmiths Pro and Am`s	gryphon	15/01/10 03:17 PM
Re: Question for the gunsmiths Pro and Am`s	Homer	15/01/10 03:58 PM
Re: Question for the gunsmiths Pro and Am`s	gryphon	15/01/10 05:44 PM
Re: Question for the gunsmiths Pro and Am`s	CHAPUISARMES	25/01/10 11:17 AM
Re: Question for the gunsmiths Pro and Am`s	Homer	25/01/10 04:30 PM
Re: Question for the gunsmiths Pro and Am`s	450_366	13/01/10 08:40 PM

Extra information

0 registered and 530 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5553

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved