Home | Ezine | Forums | Links | Contact
NitroExpress.com: Round ball Russian style?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 26613
Loc: Beautiful British Columbia, Ca...
Re: Round ball Russian style?
      23/11/09 03:57 AM

As to wads, Martin- the AA is about the best as to shape of the base, gas check. Some guys, Lyman, for instance, use the wad as-is, with the petals cut off, but this system leaves no method for keeping the ball centred. You would possibly cut the petals off, then put a deatched (petals and figers removed) base cup under the ball, with the ball sitting in the cradle of the gas check. Height is the only problem with this, but might work perfectly, as the ball has less height than the shot column. The 'extra' base wad (about 1/4"high) sitting on top of the AA wad's colum might give the correct height afterall. To get a proper crimp, one needs the correct height - experimentation is generally needed. I find if the wad column is slightly high, or slightly low, is OK. I run the case back into the crimper station to get a nice outside radius on the case mouth. This is less needed on a non-repeating 12 bore, ie: a single, over/under or side by side.

Now, a 3/4" wad punch, easily made from a 3/4" or somewhat undersized 13/16" Inside Diameter pipe, possibly case hardened will allow you to cut your own filler wads from card board or donnaconna house covering.

A .715" ball will be OK and will cast about 545gr. in pure lead and 515gr. in WW metal.

If you can get SR4756, Hodgdon's Longshot, Blue Bot or Herco, you should be able to develope smokeless loads running 1,400fps to possibly 1,600 fps with that ball. These will duplicate the 7 dram HEAVY load for African BP 12 bores mentioned by Greener. I'd have no qualms of taking on one of your buffalo with one, using a straight .715" WW or hardened WW ball.

There was one heavier load for the 12's, a 9 dram load, which would have developed perhaps 1,650fps, maybe 1,700fps but probably the lesser of the two.

BTW - shooting even a 7 dram load of BP in a light 12 bore is memorable - and hard on the stock wood. A velocity duplication load in a modern 12 bore gun, easily accomplished using smokeless powder, kicks only about 1/2 as much as a black powder load.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Round ball Russian style? beleg2 23/11/09 02:33 AM
. * * Re: Round ball Russian style? DarylS   23/11/09 02:49 AM
. * * Re: Round ball Russian style? beleg2   23/11/09 03:13 AM
. * * Re: Round ball Russian style? DarylS   23/11/09 03:57 AM
. * * Re: Round ball Russian style? beleg2   23/11/09 05:14 AM
. * * Re: Round ball Russian style? DarylS   24/11/09 02:12 AM
. * * Re: Round ball Russian style? beleg2   25/11/09 09:58 AM
. * * Re: Round ball Russian style? beleg2   13/12/09 01:34 AM

Extra information
0 registered and 8 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7610

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved