Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Sleeved / lined barrels - this OK?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Huvius
.416 member

Reged: 04/11/07
Posts: 3556
Loc: Colorado

Sleeved / lined barrels - this OK?
15/11/09 08:48 AM

I recently picked up another Farquharson - bit of a project.
It is a plain finish no-name gun with a serial number in the 16000 range - the number is stamped just in front of the lever hinge - I haven't seen any others stamped here. It is done in the Rigby style.
My major concern is that the chambering is something like a 9X57R - that is what it was described as - but none of my X57R brass will chamber. Looks like the base diameter of my cases is a larger diameter than the chamber. I did a chamber cast and it measures out a bit longer than the 9X57 should too.
The rub is: the barrel looks like it may actually be lined to the .358" groove diameter.
My hope was that it is chambered in the 400/350Rigby but it isn't - chambers are too short.
So, my question here is, would it be safe to rechamber the gun to the 400/350 to make use of the already .358" barrel and of course to keep it in a British chambering.
If not, I plan on rebarreling it to the 400/350 and using the barrel band sling swivel as well as the front and rear sights.

--------------------
He who lives in the past is doomed to enjoy it.

Edited by Huvius (16/11/09 02:49 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Sleeved / lined barrels - this OK?	Huvius	15/11/09 08:48 AM
Re: Sleeved / lined barrels - this OK?	xausa	16/11/09 08:57 AM
Re: Sleeved / lined barrels - this OK?	bonanza	16/11/09 09:02 AM
Re: Sleeved / lined barrels - this OK?	Huvius	17/11/09 03:35 PM
Re: Sleeved barrels - this OK?	AkMike	15/11/09 09:27 AM
Re: Sleeved barrels - this OK?	AkMike	15/11/09 09:29 AM
Re: Sleeved barrels - this OK?	CHAPUISARMES	15/11/09 10:10 AM
Re: Sleeved barrels - this OK?	Huvius	16/11/09 02:49 AM

Extra information

0 registered and 205 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5610

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved