Home | Ezine | Forums | Links | Contact
NitroExpress.com: 450/400 3¼ BPE granulation

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

KWK
.275 member


Reged: 28/02/04
Posts: 61
Loc: Illinois
Re: 450/400 3¼ BPE granulation
      02/11/09 01:04 PM

Thanks for the info gentlemen.

Daryl, what bullet weight were you using in the .50 3¼? That case is pretty close to the .500 BPEs. The BPE rounds used bullets from 340 to 440 gn in that caliber. The light bullets were quite spry, at almost 1950 fps, and I suspect a faster powder would be needed with these. Wright suggested loads with the heavier bullet need to use a less than full case with 3F and 2F with a full charge, which seems to agree with your experience.

The 450/400 3¼ used bullets with a SD about that of the 325 gn .50, although the case is bigger by proportion.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 450/400 3¼ BPE granulation KWK 24/10/09 10:34 AM
. * * Re: 450/400 3¼ BPE granulation Dphariss   27/10/09 02:37 AM
. * * Re: 450/400 3¼ BPE granulation KWK   27/10/09 06:28 AM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   27/10/09 11:53 AM
. * * Re: 450/400 3¼ BPE granulation KWK   27/10/09 02:01 PM
. * * Re: 450/400 3¼ BPE granulation Dphariss   30/10/09 05:09 PM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   31/10/09 03:09 AM
. * * Re: 450/400 3¼ BPE granulation KWK   02/11/09 01:04 PM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   03/11/09 02:41 AM
. * * Re: 450/400 3¼ BPE granulation KWK   03/11/09 03:17 PM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   04/11/09 04:00 AM
. * * Re: 450/400 3¼ BPE granulation Dphariss   04/11/09 04:22 AM
. * * Re: 450/400 3¼ BPE granulation degoins   04/11/09 12:09 PM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   05/11/09 04:48 AM
. * * Re: 450/400 3¼ BPE granulation degoins   05/11/09 12:38 PM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   05/11/09 05:42 PM
. * * Re: 450/400 3¼ BPE granulation DarylSModerator   24/10/09 10:28 PM
. * * Re: 450/400 3¼ BPE granulation KWK   25/10/09 10:46 AM

Extra information
0 registered and 40 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9417

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved