Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Any thoughts on screw tension/MS accuracy?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

9.3x57
.450 member

Reged: 22/04/07
Posts: 5521
Loc: United States

Re: Any thoughts on screw tension/MS accuracy?
25/09/09 11:27 PM

Malco;

Yup, forget the indexing.

I have never really been too fond of the whole lining up of screws by "art" since wood compresses and over time the likelihood of that compression resulting in further turning is high, with the temptation then to be to leave the screw "loose" in order to maintain the "art", a bad practise. A VERY thin shim can be fashioned out of aluminum foil or a thicker one from a thin beer can tho getting it perfect is difficult and maybe not worth the effort. I've used a variety of shim stock to get guard screws to line up with locking screws.

The stock ferrules have their own troubles. If slightly too long they can bear weight of the screw and that can be trouble, where the screw is locked down on the ferrule...leaving the action somewhat loose in the stock. In that case the ferrule can be removed, ground down and replaced. Better yet...thrown away as they really serve no purpose.

Sometimes a rear screw may bear against the rear internal part of the ferrule, and, as you can conjure, form a wedge of sorts under recoil, hammering the ferrule into the stock tang area until the natural occurs; splitting at the tang. Again, gently driving out the stock ferrule and finding a home for it in the rubbish bin is the answer.

--------------------
What are the Rosary, the Cross or the Crucifix other than tools to help maintain the fortress of our faith in Jesus Christ, the Son of God?

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Any thoughts on screw tension/MS accuracy?	malco	19/09/09 12:03 AM
Re: Any thoughts on screw tension/MS accuracy?	9.3x57	19/09/09 12:56 AM
Re: Any thoughts on screw tension/MS accuracy?	malco	19/09/09 01:10 AM
Re: Any thoughts on screw tension/MS accuracy?	9.3x57	19/09/09 02:04 AM
Re: Any thoughts on screw tension/MS accuracy?	DarylS	19/09/09 02:56 AM
Re: Any thoughts on screw tension/MS accuracy?	bwananelson	24/09/09 10:30 AM
Re: Any thoughts on screw tension/MS accuracy?	9.3x57	24/09/09 09:57 PM
Re: Any thoughts on screw tension/MS accuracy?	malco	25/09/09 01:57 PM
Re: Any thoughts on screw tension/MS accuracy?	9.3x57	25/09/09 11:27 PM
Re: Any thoughts on screw tension/MS accuracy?	malco	30/09/09 01:08 PM

Extra information

0 registered and 94 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2928

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved