Home | Ezine | Forums | Links | Contact
NitroExpress.com: Any thoughts on screw tension/MS accuracy?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

malco
.275 member


Reged: 11/02/09
Posts: 76
Loc: montana, usa
Re: Any thoughts on screw tension/MS accuracy?
      25/09/09 01:57 PM

The gun in question is the 1903 carbine featured in the "Two Uncommon Mannlichers" post. The rear action screw will torque down very slightly past index, but the forward screw will go a bit beyond an eighth-turn past before it seems to snug up. Factory index is obvious because the screw heads are sculpted to the taper of the stock and/or corresponding steel hardware. For what it's worth, Mannlicher Schoenauers do have a steel bushing/ferrule surrounding the rear screw. Please keep commenting--I find all of this instructive!
Best,
Malcolm

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Any thoughts on screw tension/MS accuracy? malco 19/09/09 12:03 AM
. * * Re: Any thoughts on screw tension/MS accuracy? 9.3x57   19/09/09 12:56 AM
. * * Re: Any thoughts on screw tension/MS accuracy? malco   19/09/09 01:10 AM
. * * Re: Any thoughts on screw tension/MS accuracy? 9.3x57   19/09/09 02:04 AM
. * * Re: Any thoughts on screw tension/MS accuracy? DarylS   19/09/09 02:56 AM
. * * Re: Any thoughts on screw tension/MS accuracy? bwananelson   24/09/09 10:30 AM
. * * Re: Any thoughts on screw tension/MS accuracy? 9.3x57   24/09/09 09:57 PM
. * * Re: Any thoughts on screw tension/MS accuracy? malco   25/09/09 01:57 PM
. * * Re: Any thoughts on screw tension/MS accuracy? 9.3x57   25/09/09 11:27 PM
. * * Re: Any thoughts on screw tension/MS accuracy? malco   30/09/09 01:08 PM

Extra information
0 registered and 86 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2928

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved