Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Dracon Filler in a 450 BPE

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

400NitroExpress
.400 member

Reged: 26/11/03
Posts: 1154
Loc: Lone Star State

Re: Dracon Filler in a 450 BPE
12/09/09 09:34 AM

Bob:

Good responses from Tinker and Curl. Use the Dacron. Always err on the side of too much, rather than too little.

I've used Dacron in double rifles for 20 years and have heard warnings of dire consequences for doing so from theorists (rather than double rifle shooters) the entire time. Whenever damage is reported, it virtually always turns out that a tiny little tuft was pushed down on top of the powder instead of filling the remaining air space up to the point of compression. I've never once heard of an instance where damage (such as a ringed chamber) occurred when dacron was used properly. Because of the necessity of fillers in the large flanged Cordite rounds and BPEs, dacron has been used in this role for decades now, and the does and don'ts are long since settled.

In the Cordite rounds, Kynoch uses their foam wads in virtually all of their factory ammunition over .375 caliber, and I've never had a report of a hiccup. However, Ross Seyfried HAS reported ringed chambers from the use of multiple foam wads in Nitro for Black applications. Again though, I've never had a single credible report regarding dacron in NfB loads, when used as you describe (12-14 grains in a .450 BPE), and it's been done that way for a long, long time.

--------------------
"Serious rifles have two barrels, everything else just burns gunpowder."

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Dracon Filler in a 450 BPE	ellenbr	12/09/09 07:15 AM
Re: Dracon Filler in a 450 BPE	doubleriflejack	18/09/09 07:57 AM
Re: Dracon Filler in a 450 BPE	400NitroExpress	12/09/09 09:34 AM
Re: Dacron Filler in a 450 BPE	9.3x57	12/09/09 09:52 AM
Re: Dacron Filler in a 450 BPE	ChrisPer	12/09/09 07:21 PM
Re: Dacron Filler in a 450 BPE	DarylS	13/09/09 12:29 AM
Re: Dacron Filler in a 450 BPE	9.3x57	13/09/09 01:53 AM
Re: Dacron Filler in a 450 BPE	450_EXPRESS	13/09/09 03:02 AM
Re: Dacron Filler in a 450 BPE	9.3x57	13/09/09 05:11 AM
Re: Dacron Filler in a 450 BPE	DUGABOY1	18/09/09 03:17 AM
Re: Dracon Filler in a 450 BPE	herrdoktor	12/09/09 08:11 AM
Re: Dracon Filler in a 450 BPE	CptCurl	12/09/09 08:38 AM
Re: Dracon Filler in a 450 BPE	ellenbr	12/09/09 09:00 AM

Extra information

0 registered and 36 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13306

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved