Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Case taper, extraction... and the Martini Cadet

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

TilleyMan
.333 member

Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia

Re: Case taper, extraction... and the Martini Cadet
20/08/09 09:54 AM

DD

Thanks for the info, a pity things aren't quite as straightforward as I had hoped

What are the known weaknesses of the thin sided Martini Cadet?
Seems the preferred actions all have thicker sidewalls and a reinforce bulge around the barrel tenon seating area...
I tend to steer clear of the Sportco Martini conversions, as the action side walls were all surface ground (~.030"+ per side) to remove rust pits and proof marks, Govt stampings etc before reblueing... which further weakened them. They also fitted an annoying cross slide safety just behind the trigger.

In Australia there's two main conversions I've seen... the quick'n'dirty way which involves chamfering out and TIG welding the off-centre RF firing pin hole at the end of the falling block. Danger of overheating and distorting/weakening the block if anything other than TIG or MIG is used.
Facing off flat and re-drilling (from the rear to ensure concentricity) and remachining a smaller central CF firing pin hole. New or replacement CF .310 firing pin then reprofiled to match the new hole ; and

The 'proper' way:
Counterboring and a threaded bushing made up (similar to the refinished blocks on a Martini Enfield .303 factory refurbishment), new or replacement CF .310 firing pin then reprofiled to match the new hole.

Do you have any links or recommended books on the M12 or M1215 conversion please?

Cheers

TM

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Case taper, extraction... and the Martini Cadet	TilleyMan	17/08/09 09:35 PM
Re: Case taper, extraction... and the Martini Cadet	Tatume	17/08/09 10:08 PM
Re: Case taper, extraction... and the Martini Cadet	Otto	17/08/09 11:49 PM
Re: Case taper, extraction... and the Martini Cadet	DarylS	18/08/09 02:05 AM
Re: Case taper, extraction... and the Martini Cadet	xausa	18/08/09 05:16 AM
Re: Case taper, extraction... and the Martini Cadet	DarylS	18/08/09 11:15 AM
Re: Case taper, extraction... and the Martini Cadet	TilleyMan	18/08/09 11:53 AM
Re: Case taper, extraction... and the Martini Cadet	DoubleD	18/08/09 01:46 PM
Re: Case taper, extraction... and the Martini Cadet	TilleyMan	20/08/09 09:54 AM
Re: Case taper, extraction... and the Martini Cadet	TilleyMan	31/08/09 09:16 PM
Re: Case taper, extraction... and the Martini Cadet	DoubleD	01/09/09 01:34 AM
Re: Case taper, extraction... and the Martini Cadet	TilleyMan	01/09/09 08:37 PM
Re: Case taper, extraction... and the Martini Cadet	DoubleD	01/09/09 11:37 PM

Extra information

0 registered and 47 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13592

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved