Home | Ezine | Forums | Links | Contact
NitroExpress.com: Alex Henry 450 3 1/4

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

eagle27
.400 member


Reged: 24/01/09
Posts: 1204
Loc: Rolleston, Christchurch, New Z...
Re: Alex Henry 450 3 1/4
      08/08/09 08:04 AM

Dutch44

Have another think about shaving a few thou of your sizing die. If the issue is your shell bases are not being sized down for your tight Henry chambers and presumably you have the shell holder in the ram bumping the base of the die, then shaving the die will not do a thing for your problem. Shaving the die only helps if the shoulder of a bottle neck case is not being pushed back enough from a stretched case from an oversized chamber.

Your issue appears to be the base portion of the shell in the shell holder is not being sized down as it does not go into the die. On another post our learned friend Von Gruff has the right answer - shave the top of the shell holder thus allowing more of the shell base to enter the die. You only then sacrifice a cheap shell holder without touching the die. This also works for pushing back case shoulders as well. Shaving a die does not alter the die/shell holder interface.

Hopefully you can shave the shell holder down enough without weakening it, to allow case extraction from the sizing die and the case base will be sized down enough to fit your Henry chambers.
If not then your method of forcing the case completely into the die using a pusher shell holder and a dowel to punch the case back out is the only solution to get your case sized down the first time for the Henry chambers.

Hope this is all clear and helps.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Alex Henry 450 3 1/4 Dutch44 26/04/09 02:43 AM
. * * Re: Alex Henry 450 3 1/4 Anonymous   26/04/09 03:31 AM
. * * Re: Alex Henry 450 3 1/4 Dutch44   26/04/09 06:02 AM
. * * Re: Alex Henry 450 3 1/4 Anonymous   26/04/09 06:30 AM
. * * Re: Alex Henry 450 3 1/4 Arctic   26/04/09 07:23 AM
. * * Re: Alex Henry 450 3 1/4 500Nitro   26/04/09 07:39 AM
. * * Re: Alex Henry 450 3 1/4 470evans   26/04/09 10:53 AM
. * * Re: Alex Henry 450 3 1/4 Paul   26/04/09 08:36 PM
. * * Re: Alex Henry 450 3 1/4 500Nitro   27/04/09 02:05 AM
. * * Re: Alex Henry 450 3 1/4 Paul   27/04/09 10:48 PM
. * * Re: Alex Henry 450 3 1/4 Huvius   27/04/09 11:16 PM
. * * Re: Alex Henry 450 3 1/4 Dutch44   27/04/09 11:39 PM
. * * Re: Alex Henry 450 3 1/4 DarylS   28/04/09 02:41 AM
. * * Re: Alex Henry 450 3 1/4 470evans   28/04/09 04:00 AM
. * * Re: Alex Henry 450 3 1/4 Dutch44   01/05/09 11:26 PM
. * * Re: Alex Henry 450 3 1/4 DarylS   02/05/09 12:03 AM
. * * Re: Alex Henry 450 3 1/4 Dutch44   02/05/09 01:25 AM
. * * Re: Alex Henry 450 3 1/4 Huvius   07/08/09 11:03 PM
. * * Re: Alex Henry 450 3 1/4 eagle27   08/08/09 08:04 AM
. * * Re: Alex Henry 450 3 1/4 tinker   08/08/09 10:17 AM
. * * Re: Alex Henry 450 3 1/4 DarylS   09/08/09 01:36 AM
. * * Re: Alex Henry 450 3 1/4 eagle27   09/08/09 07:53 AM
. * * Re: Alex Henry 450 3 1/4 Dutch44   19/08/09 09:56 AM
. * * Re: Alex Henry 450 3 1/4 500Nitro   26/04/09 02:53 AM

Extra information
0 registered and 70 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8280

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved