Home | Ezine | Forums | Links | Contact
NitroExpress.com: 10,75x68 Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

eagle27
.400 member


Reged: 24/01/09
Posts: 1124
Loc: Nelson, New Zealand
Re: 10,75x68 Mauser
      05/08/09 04:46 PM

Wolf's loads for his 10.75x68 seem reasonable with his 400gr SP at 2100fps which about duplicates the old .404 load. I find it very hard to believe that 2300fps with a 400gr would be attainable in this rather small case. It would certainly be pushing the pressure boundaries and I would not like to use such loadings in early firearms chambered in 10.75x68.

Another point that has not been mentioned, although is recognized in other posts on case life, is the issue of the very slight shoulder that the 68 case has. As in the other posts and in particularly in reference to the 375H&H, shallow case shoulders tend to allow brass flow leading to very short case life. I imagine with the scarcity and cost of cases lower pressure loads would be the order of the day in the 10.75x68.

On the earlier query in this post about the velocities Von Gruff achieved from some old Kynoch rounds in his .404, I checked back in some notes and I see I did pull a Kynoch .404 round some years ago to see what and how much powder was loaded. This was a round from original sealed packets of five of the nitrocellulose “increased velocity” load with an advertised velocity of 2225fps. The cartridges are Berdan primed with purple sealer around the primer pockets.
The powder charge weighed in at 75.0 grains and most likely Nobels No 1. These cartridges chronograph at just on 2200 fps in my .404.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 10,75x68 Mauser grandveneur 11/04/09 02:31 AM
. * * Re: 10,75x68 Mauser 450_366   12/04/09 11:26 PM
. * * Re: 10,75x68 Mauser grandveneur   13/04/09 12:07 AM
. * * Re: 10,75x68 Mauser peter   11/04/09 02:57 AM
. * * Re: 10,75x68 Mauser VonGruff   11/04/09 10:03 AM
. * * Re: 10,75x68 Mauser peter   12/04/09 05:12 AM
. * * Re: 10,75x68 Mauser VonGruff   12/04/09 05:56 PM
. * * Re: 10,75x68 Mauser peter   13/04/09 03:45 AM
. * * Re: 10,75x68 Mauser VonGruff   13/04/09 07:52 AM
. * * Re: 10,75x68 Mauser peter   14/04/09 01:46 AM
. * * Re: 10,75x68 Mauser VonGruff   14/04/09 07:09 AM
. * * Re: 10,75x68 Mauser eagle27   14/04/09 05:21 PM
. * * Re: 10,75x68 Mauser peter   15/04/09 03:54 AM
. * * Re: 10,75x68 Mauser ozhunter   14/04/09 08:16 PM
. * * Re: 10,75x68 Mauser Rolf   15/04/09 03:39 AM
. * * Re: 10,75x68 Mauser grandveneur   13/04/09 04:49 AM
. * * Re: 10,75x68 Mauser peter   13/04/09 04:52 AM
. * * Re: 10,75x68 Mauser grandveneur   02/08/09 08:19 PM
. * * Re: 10,75x68 Mauser simonsaorsa   05/08/09 01:49 AM
. * * Re: 10,75x68 Mauser eagle27   05/08/09 04:46 PM
. * * Re: 10,75x68 Mauser peter   02/08/09 09:53 PM
. * * Re: 10,75x68 Mauser grandveneur   03/08/09 12:52 AM
. * * Re: 10,75x68 Mauser NitroXAdministrator   03/08/09 05:03 PM
. * * Re: 10,75x68 Mauser VonGruff   04/08/09 05:50 AM
. * * Re: 10,75x68 Mauser eagle27   04/08/09 05:00 PM
. * * Re: 10,75x68 Mauser eagle27   04/08/09 07:13 PM
. * * Re: 10,75x68 Mauser andrevannibos   04/08/09 07:36 PM
. * * Re: 10,75x68 Mauser eagle27   03/08/09 06:56 PM
. * * Re: 10,75x68 Mauser andrevannibos   03/08/09 11:29 PM
. * * Re: 10,75x68 Mauser grandveneur   12/04/09 06:14 PM
. * * Re: 10,75x68 Mauser VonGruff   12/04/09 06:47 PM
. * * Re: 10,75x68 Mauser lancaster   11/04/09 03:25 AM
. * * Re: 10,75x68 Mauser ozhunter   11/04/09 09:38 AM
. * * Re: 10,75x68 Mauser grandveneur   11/04/09 04:20 PM
. * * Re: 10,75x68 Mauser grandveneur   13/04/09 12:17 AM
. * * Re: 10,75x68 Mauser 450_366   13/04/09 04:39 AM

Extra information
0 registered and 37 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12798

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved