Home | Ezine | Forums | Links | Contact
NitroExpress.com: Remington Purchases Dakota Arms (Nesika, Miller etc)

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Bramble
.375 member


Reged: 29/07/06
Posts: 950
Loc: England
Re: Remington Purchases Dakota Arms (Nesika, Miller etc)
      14/06/09 08:14 AM

Quote:



Bramble,
Not sure I am understanding your statement. When I hunt, whether dangerous game or not, I have a round in the chamber, but especially when hunting dangerous game. The clip is full with one up the pipe...assume anyone using a controlled round feed action would do the same..if not, then I guess the previous post really doesn't matter. But if one does, unless you made the modification above correct???


Ripp




I think you are asking if the modification is necessary to allow a full mag + 1 in the chamber ?

If so, then that is correct. The extractor must be modified and you must hold down the top round in the mag to allow the bolt to slide over and chamber the loose round.

I do not do that, my rifles are not so modified. If it is a four round mag , then I cycle the bolt when making ready and have 3+1 in the chamber.

I think it is very much personal preference. I like to be able to make the gun safe for whatever reason ( entering vehicles, climbing fences taking a piss etc etc) by pulling back the bolt, thumbing down the round and closing on an empty chamber. If I had to think about a loose round then it would play on my mind both ways, ie is the gun clear when I need it to be, and conversley is it loaded with that extra round when something pops its head up.

500

I am not suggesting that the modification makes the Mauser extractor really week or that it is prone to failure. However by definition as it involves the removal of metal it must weaken the tip to a greater or lessor extent.
IMHO the chance of needing a 5th round is a lessor risk than having a modified extractor jump the rim. To make the mod work, sufficient metal must be removed to allow the extractor to jump the rim on the forward stroke before the outside face of the extractor hits the inside of the RHS bolt raceway. If an un-modified extractor is fitted carefully, there is insufficient clearence here to allow the extractor to slip over the rim on loading and hence on extraction.
IE it cannot run over the rim on sticky extraction, the very worst it can do is rip the rim off.

Regards

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Remington Purchases Dakota Arms (Nesika, Miller etc) Homer 11/06/09 11:31 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) 500Nitro   11/06/09 11:58 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Homer   11/06/09 12:27 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) SharpsNitro   12/06/09 11:25 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Ripp   12/06/09 10:35 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Homer   12/06/09 04:39 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) SharpsNitro   13/06/09 01:37 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Bramble   13/06/09 11:27 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Ripp   14/06/09 12:46 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Bramble   14/06/09 08:14 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) 500Nitro   14/06/09 12:54 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Ripp   14/06/09 09:08 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) 500Nitro   14/06/09 09:20 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Homer   14/06/09 11:39 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) 500Nitro   11/06/09 12:32 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Ripp   11/06/09 12:54 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Homer   11/06/09 01:54 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Ripp   12/06/09 11:07 AM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) NitroXAdministrator   11/06/09 02:00 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) Homer   11/06/09 02:06 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) NitroXAdministrator   11/06/09 01:40 PM
. * * Re: Remington Purchases Dakota Arms (Nesika, Miller etc) SharpsNitro   12/06/09 11:22 AM

Extra information
0 registered and 105 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5916

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved