Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: winchester 95 9,3x53R

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> 'Classic' Firearms Photos & Archive

lancaster
.470 member

Reged: 06/05/08
Posts: 9033
Loc: There's a lighthouse in the mi...

Re: winchester 95 9,3x53R
11/05/09 04:08 PM

at least you have the holes on the target

no, to be seroius, I found the copper plated lead bullets very sensitive with only ligth pitted bores and not 100% correct reloading tactic. also only trust them at 50 meter.
what was your load, vithavouri N110 powder?
what you need is a long softpoint bullet, 286 grains! if this will not grouping you better sell the rifle to me.

the bullet on my pic was made from cut down 222 rem brass(.375 base diameter), loaded one of this copper plated 8mm S bullet inside. it was the only bullet I have on hands to try the new reloading die set. in the name of sience I was making a plinking bullet for a 9,5mm MS on my wish list. see sometimes here that some of you make .366 bullets from such homemade softpoints. when thinking about 9mm parabellum brass(.389)is swaged down to .366 was believing that .375 is much more simple to reduce. a homemade die that endet in .368 because I wasnt careful enough was not pleasent to swage in the rock chucker. in the end I have to rebore it to .3705.
make another .366 die and swage in two steps is maybe the way to go.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
winchester 95 9,3x53R	lancaster	26/04/09 08:42 PM
Re: winchester 95 9,3x53R	mehulkamdar	27/04/09 03:12 AM
Re: winchester 95 9,3x53R	9.3x57	27/04/09 04:45 AM
Re: winchester 95 9,3x53R	9.3x57	27/04/09 04:52 AM
Re: winchester 95 9,3x53R	lancaster	27/04/09 10:52 AM
Re: winchester 95 9,3x53R	Schauckis	28/04/09 05:00 AM
Re: winchester 95 9,3x53R	9.3x57	28/04/09 08:23 AM
Re: winchester 95 9,3x53R	Schauckis	28/04/09 06:01 PM
Re: winchester 95 9,3x53R	lancaster	28/04/09 03:48 PM
Re: winchester 95 9,3x53R	Schauckis	28/04/09 06:09 PM
Re: winchester 95 9,3x53R	lancaster	28/04/09 08:32 PM
Re: winchester 95 9,3x53R	9.3x57	28/04/09 11:56 PM
Re: winchester 95 9,3x53R	lancaster	29/04/09 12:15 AM
Re: winchester 95 9,3x53R	9.3x57	29/04/09 12:32 AM
Re: winchester 95 9,3x53R	awo425	29/04/09 01:04 AM
Re: winchester 95 9,3x53R	Schauckis	30/04/09 05:02 AM
Re: winchester 95 9,3x53R	awo425	30/04/09 05:21 AM
Re: winchester 95 9,3x53R	Schauckis	01/05/09 05:13 AM
Re: winchester 95 9,3x53R	Igorrock	01/05/09 05:46 PM
Re: winchester 95 9,3x53R	lancaster	01/05/09 08:38 PM
Re: winchester 95 9,3x53R	awo425	11/05/09 04:49 AM
Re: winchester 95 9,3x53R	9.3x57	11/05/09 05:42 AM
Re: winchester 95 9,3x53R	lancaster	11/05/09 04:08 PM
Re: winchester 95 9,3x53R	lancaster	11/05/09 04:10 PM
Re: winchester 95 9,3x53R	9.3x57	11/05/09 10:26 PM
Re: winchester 95 9,3x53R	awo425	12/05/09 06:46 AM
Re: winchester 95 9,3x53R	lancaster	12/05/09 08:43 PM
Re: winchester 95 9,3x53R	awo425	13/05/09 06:29 AM
Re: winchester 95 9,3x53R	Hobbit	03/06/09 11:41 AM
Re: winchester 95 9,3x53R	9.3x57	03/06/09 11:47 AM
Re: winchester 95 9,3x53R	awo425	15/06/09 05:15 AM
Re: winchester 95 9,3x53R	VonGruff	15/06/09 08:39 AM
Re: winchester 95 9,3x53R	awo425	15/06/09 03:34 PM
Re: winchester 95 9,3x53R	lancaster	15/06/09 04:04 PM
Re: winchester 95 9,3x53R	awo425	16/06/09 04:46 AM
Re: winchester 95 9,3x53R	lancaster	16/06/09 12:43 PM
Re: winchester 95 9,3x53R	9.3x57	16/06/09 01:42 PM
Re: winchester 95 9,3x53R	awo425	16/06/09 03:40 PM
Re: winchester 95 9,3x53R	lancaster	10/08/09 04:50 AM
Re: winchester 95 9,3x53R	Schauckis	28/08/09 06:25 AM
Re: winchester 95 9,3x53R	Schauckis	30/08/09 02:51 AM
Re: winchester 95 9,3x53R	9.3x57	31/08/09 02:17 AM
Re: winchester 95 9,3x53R	Schauckis	31/08/09 06:11 AM
Re: winchester 95 9,3x53R	lancaster	30/04/09 05:19 AM
Re: winchester 95 9,3x53R	9.3x57	29/04/09 01:16 AM
Re: winchester 95 9,3x53R	awo425	29/04/09 04:46 AM
Re: winchester 95 9,3x53R	9.3x57	29/04/09 11:29 AM
Re: winchester 95 9,3x53R	Igorrock	29/04/09 02:48 PM
Re: winchester 95 9,3x53R	9.3x57	29/04/09 03:14 PM
Re: winchester 95 9,3x53R	lancaster	29/04/09 04:02 PM
Re: winchester 95 9,3x53R	lancaster	29/04/09 04:24 PM
Re: winchester 95 9,3x53R	9.3x57	29/04/09 10:50 PM
Re: winchester 95 9,3x53R	awo425	29/04/09 05:29 PM
Re: winchester 95 9,3x53R	xausa	28/04/09 11:22 PM
Re: winchester 95 9,3x53R	9.3x57	27/04/09 12:51 AM
Re: winchester 95 9,3x53R	lancaster	27/04/09 04:42 AM

Extra information

0 registered and 21 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 47616

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved