Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Alex Henry 450 3 1/4

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

Dutch44
.275 member

Reged: 23/02/06
Posts: 80
Loc: Missouri

Re: Alex Henry 450 3 1/4
27/04/09 11:39 PM

Artic:
I ended up lubing the cases well and running a couple through the sizing die without a shell holder. Used a .22 Hornet shell holder to run it up all the way into the die. Ran it out with a metal dowel rod that fit the case and, voila, it chambered perfectly. A friend is going to face off a m/m of the bottom of the die in hopes that this will solve the problem. My fired brass was out of a Rigby hammer 450 3 1/4 Nitro.

470evans:
I had thought that maybe the crimp would be a problem. I put a crimp on the brass that I had initially inserted but they still did not want to chamber. That's when I called my friend and he made the suggestion to push the case up the die without the holder.

500Nitro:
I am taking your advice and dedicating brass to each rifle. No sense in reinventing the wheel.

Generalwar:
My friend that will be working on the die will be slugging the bore and utilizing a "v" something-or-other and a point indicator something-or-other for the 7 land/groove. Once I have correct measurements then all set to load, if bore/groove diameter is correct for caliber.

Dutch

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Alex Henry 450 3 1/4	Dutch44	26/04/09 02:43 AM
Re: Alex Henry 450 3 1/4	Anonymous	26/04/09 03:31 AM
Re: Alex Henry 450 3 1/4	Dutch44	26/04/09 06:02 AM
Re: Alex Henry 450 3 1/4	Anonymous	26/04/09 06:30 AM
Re: Alex Henry 450 3 1/4	Arctic	26/04/09 07:23 AM
Re: Alex Henry 450 3 1/4	500Nitro	26/04/09 07:39 AM
Re: Alex Henry 450 3 1/4	470evans	26/04/09 10:53 AM
Re: Alex Henry 450 3 1/4	Paul	26/04/09 08:36 PM
Re: Alex Henry 450 3 1/4	500Nitro	27/04/09 02:05 AM
Re: Alex Henry 450 3 1/4	Paul	27/04/09 10:48 PM
Re: Alex Henry 450 3 1/4	Huvius	27/04/09 11:16 PM
Re: Alex Henry 450 3 1/4	Dutch44	27/04/09 11:39 PM
Re: Alex Henry 450 3 1/4	DarylS	28/04/09 02:41 AM
Re: Alex Henry 450 3 1/4	470evans	28/04/09 04:00 AM
Re: Alex Henry 450 3 1/4	Dutch44	01/05/09 11:26 PM
Re: Alex Henry 450 3 1/4	DarylS	02/05/09 12:03 AM
Re: Alex Henry 450 3 1/4	Dutch44	02/05/09 01:25 AM
Re: Alex Henry 450 3 1/4	Huvius	07/08/09 11:03 PM
Re: Alex Henry 450 3 1/4	eagle27	08/08/09 08:04 AM
Re: Alex Henry 450 3 1/4	tinker	08/08/09 10:17 AM
Re: Alex Henry 450 3 1/4	DarylS	09/08/09 01:36 AM
Re: Alex Henry 450 3 1/4	eagle27	09/08/09 07:53 AM
Re: Alex Henry 450 3 1/4	Dutch44	19/08/09 09:56 AM
Re: Alex Henry 450 3 1/4	500Nitro	26/04/09 02:53 AM

Extra information

0 registered and 158 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8262

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved