Home | Ezine | Forums | Links | Contact
NitroExpress.com: SOLIDS

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: SOLIDS
      10/04/04 03:55 AM

I have been using the GS solids in 404,416 Rem., 450-400,9.3x62, 9.3x64, and the 375 for the last few years..My good friend Johan Calitz has shot a ton of elephants with them in his Searcy 470. I will be shooting them in my Searcy 470 as they regulate with the factory regulation load...

I have shot a lot of Buffalo with them and as far as I am concerned, based on my experience and Johans experience, I see little need for any other bullet..That flat nose solid penitrates better than anything I have seen and the permanent cavity and temporary cavity made by them on game is very close to that of a soft point...

I have shot a lot of plainsgame with them in my 375 and 416 and they kill about like one would expect from a premium soft...

They are the best of both worlds IMO...Also applies to the Bridger Bullets, but they no longer exist..

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* SOLIDS 475Guy 05/04/04 11:49 AM
. * * Re: SOLIDS GeorgeS   06/04/04 06:36 AM
. * * Re: SOLIDS 475Guy   06/04/04 09:16 AM
. * * Re: SOLIDS atkinson6   10/04/04 03:55 AM
. * * Re: SOLIDS 500grains   06/04/04 07:26 AM
. * * Re: SOLIDS 500grains   06/04/04 07:29 AM

Extra information
0 registered and 14 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2228

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved