Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10,75x68 Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

eagle27
.400 member

Reged: 24/01/09
Posts: 1134
Loc: Nelson, New Zealand

Re: 10,75x68 Mauser
14/04/09 05:21 PM

Peter

Lets not get too carried away with bullet diameters. There is plenty of information around about the different bore diameters of the old German and British DG rifles, with those for the .404J and 10.75x68 Mauser cartridges being no exception.

I have an original Type A Oberndorf Mauser opened up from 10.75x68 to .404J as many of the British gunmakers did with the standard length Military or Oberndorf sporter actions. Obviously my barrel is the 10,45/10,75 groove and bore as mentioned by grandveneur above (these are the actual measurements stamped on my barrel too).

As for projectiles, I use original RWS 347gr flat point soft nosed bullets and RWS 400gr FMJ's in my reloads as well as original Kynoch 400gr soft point ammunition and Parker Hale (loaded by Norma) 400gr FMJ factory ammunition. All engrave in the rifling and shoot well on target and animals. Other projectile samples I have all measure between .421" and .423" and I am sure would all shoot very well in my 10.75x68/404J.
350gr and 400gr gas checked cast projectiles sized at .425" also shoot extremely well.

There never was a 400gr factory load for the 10.75x68. All things being equal, it is ballistically impossible to match the .404J using a smaller case especially if maintaining reasonable DG working pressures and bullets seated to normal depth with a crimp applied. Experimental loads for the 10.75x68 duplicating the 404J and having out of spec pressures and cartridge lengths are only good for the target and probably not good for the gun.

Why bother attempting to achieve that, just use the 10.75x68 as it is for fun and get a 404J for even greater fun, and for DG.

Eagle27

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
10,75x68 Mauser	grandveneur	11/04/09 02:31 AM
Re: 10,75x68 Mauser	450_366	12/04/09 11:26 PM
Re: 10,75x68 Mauser	grandveneur	13/04/09 12:07 AM
Re: 10,75x68 Mauser	peter	11/04/09 02:57 AM
Re: 10,75x68 Mauser	VonGruff	11/04/09 10:03 AM
Re: 10,75x68 Mauser	peter	12/04/09 05:12 AM
Re: 10,75x68 Mauser	VonGruff	12/04/09 05:56 PM
Re: 10,75x68 Mauser	peter	13/04/09 03:45 AM
Re: 10,75x68 Mauser	VonGruff	13/04/09 07:52 AM
Re: 10,75x68 Mauser	peter	14/04/09 01:46 AM
Re: 10,75x68 Mauser	VonGruff	14/04/09 07:09 AM
Re: 10,75x68 Mauser	eagle27	14/04/09 05:21 PM
Re: 10,75x68 Mauser	peter	15/04/09 03:54 AM
Re: 10,75x68 Mauser	ozhunter	14/04/09 08:16 PM
Re: 10,75x68 Mauser	Rolf	15/04/09 03:39 AM
Re: 10,75x68 Mauser	grandveneur	13/04/09 04:49 AM
Re: 10,75x68 Mauser	peter	13/04/09 04:52 AM
Re: 10,75x68 Mauser	grandveneur	02/08/09 08:19 PM
Re: 10,75x68 Mauser	simonsaorsa	05/08/09 01:49 AM
Re: 10,75x68 Mauser	eagle27	05/08/09 04:46 PM
Re: 10,75x68 Mauser	peter	02/08/09 09:53 PM
Re: 10,75x68 Mauser	grandveneur	03/08/09 12:52 AM
Re: 10,75x68 Mauser	NitroX	03/08/09 05:03 PM
Re: 10,75x68 Mauser	VonGruff	04/08/09 05:50 AM
Re: 10,75x68 Mauser	eagle27	04/08/09 05:00 PM
Re: 10,75x68 Mauser	eagle27	04/08/09 07:13 PM
Re: 10,75x68 Mauser	andrevannibos	04/08/09 07:36 PM
Re: 10,75x68 Mauser	eagle27	03/08/09 06:56 PM
Re: 10,75x68 Mauser	andrevannibos	03/08/09 11:29 PM
Re: 10,75x68 Mauser	grandveneur	12/04/09 06:14 PM
Re: 10,75x68 Mauser	VonGruff	12/04/09 06:47 PM
Re: 10,75x68 Mauser	lancaster	11/04/09 03:25 AM
Re: 10,75x68 Mauser	ozhunter	11/04/09 09:38 AM
Re: 10,75x68 Mauser	grandveneur	11/04/09 04:20 PM
Re: 10,75x68 Mauser	grandveneur	13/04/09 12:17 AM
Re: 10,75x68 Mauser	450_366	13/04/09 04:39 AM

Extra information

0 registered and 84 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12844

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved