Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10,75x68 Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

VonGruff
.400 member

Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.

Re: 10,75x68 Mauser
12/04/09 05:56 PM

Peter I was not talking about Rigby loading as much as looking at what factory cartridges were doing in my rifle. I had origional Kynoch and RWS cartridges( still have some of the Kynoch left but I except the RWS as a modern loading ) that I shot for comparative testing when i was developing loads and the Kynoch ran at 2192 and the RWS ran at 2315and even if we only look at the Kynch load it is still a bit above the 1950fps that Grandveneur quotes for the RWS load. I agree that modern powders and bullets give some of our older cartridges a performance increase but I would still hesitate to recomend the 10.75x68 to be used where one might have comfortably used a 404 Jeffery except in ideal circumstances and that is not always the case is it.
As regards the 30-06 with the light magnum loading and it bridging toward the 300 mag would it not hold true that the same technology and subsequent powder developement take the 300 Mag that much further ahead and maintain the performance disparity. This takes nothing away from the developement of better performance capability for the 10.75x68 and I would be interested, as I am sure will others,to see the data that you have for these new loads.

Von Gruff

--------------------
Von Gruff.

Exodus 20:1-17

Acts 4:10-12

Edited by VonGruff (12/04/09 05:58 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
10,75x68 Mauser	grandveneur	11/04/09 02:31 AM
Re: 10,75x68 Mauser	450_366	12/04/09 11:26 PM
Re: 10,75x68 Mauser	grandveneur	13/04/09 12:07 AM
Re: 10,75x68 Mauser	peter	11/04/09 02:57 AM
Re: 10,75x68 Mauser	VonGruff	11/04/09 10:03 AM
Re: 10,75x68 Mauser	peter	12/04/09 05:12 AM
Re: 10,75x68 Mauser	VonGruff	12/04/09 05:56 PM
Re: 10,75x68 Mauser	peter	13/04/09 03:45 AM
Re: 10,75x68 Mauser	VonGruff	13/04/09 07:52 AM
Re: 10,75x68 Mauser	peter	14/04/09 01:46 AM
Re: 10,75x68 Mauser	VonGruff	14/04/09 07:09 AM
Re: 10,75x68 Mauser	eagle27	14/04/09 05:21 PM
Re: 10,75x68 Mauser	peter	15/04/09 03:54 AM
Re: 10,75x68 Mauser	ozhunter	14/04/09 08:16 PM
Re: 10,75x68 Mauser	Rolf	15/04/09 03:39 AM
Re: 10,75x68 Mauser	grandveneur	13/04/09 04:49 AM
Re: 10,75x68 Mauser	peter	13/04/09 04:52 AM
Re: 10,75x68 Mauser	grandveneur	02/08/09 08:19 PM
Re: 10,75x68 Mauser	simonsaorsa	05/08/09 01:49 AM
Re: 10,75x68 Mauser	eagle27	05/08/09 04:46 PM
Re: 10,75x68 Mauser	peter	02/08/09 09:53 PM
Re: 10,75x68 Mauser	grandveneur	03/08/09 12:52 AM
Re: 10,75x68 Mauser	NitroX	03/08/09 05:03 PM
Re: 10,75x68 Mauser	VonGruff	04/08/09 05:50 AM
Re: 10,75x68 Mauser	eagle27	04/08/09 05:00 PM
Re: 10,75x68 Mauser	eagle27	04/08/09 07:13 PM
Re: 10,75x68 Mauser	andrevannibos	04/08/09 07:36 PM
Re: 10,75x68 Mauser	eagle27	03/08/09 06:56 PM
Re: 10,75x68 Mauser	andrevannibos	03/08/09 11:29 PM
Re: 10,75x68 Mauser	grandveneur	12/04/09 06:14 PM
Re: 10,75x68 Mauser	VonGruff	12/04/09 06:47 PM
Re: 10,75x68 Mauser	lancaster	11/04/09 03:25 AM
Re: 10,75x68 Mauser	ozhunter	11/04/09 09:38 AM
Re: 10,75x68 Mauser	grandveneur	11/04/09 04:20 PM
Re: 10,75x68 Mauser	grandveneur	13/04/09 12:17 AM
Re: 10,75x68 Mauser	450_366	13/04/09 04:39 AM

Extra information

0 registered and 194 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13280

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved