Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Patent Brenneke Drilling - Engraving

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Buchsemann
.333 member

Reged: 12/12/08
Posts: 439
Loc: Wisconsin, USA

Re: Patent Brenneke Drilling - Engraving
11/03/09 02:44 PM

Mehul,

Thank you for sharing the Jagd & Freizeit listing with me. The Brenneke featured in the listing is an interesting combination of two Brenneke breech designs that I haven't seen before. I've attached a picture of another drilling that a fellow GGCA member sent me some time ago showing the same barrel/breech interface as the gun pictured in the listing but with pretty much a standard “blitz” action. The gun in the listing has the more complicated action with multiple safety features closer to mine, to include the low profile hammer like cocking levers/cocking indicators but it's not a "clamshell". Brenneke called the reinforced barrel/breech interface of the two non-clamshell designs the Brenneke "Verschluss" and the clamshells were called the Brenneke "Ideal Verschluss". He offered the "Ideal Verschluss" configured with a standard "blitz" action or the more complicated "Sicherheits" (safety) models. I knew Brenneke had offered the “Verschluss” breech design with either a “box-lock” or “blitz” action but until now I had not seen a third choice. It's neat for me to see this so I thank you again.

Marcus

PS – All of the Brenneke break-open receiver configurations that I knew of were available for drillings, double rifles, and shotguns. It looks like the action shown in the Jagd & Freizeit listing leads to the possibility of a few more variations.

I almost forgot to mention that Brenneke “Sicherheits” actions are also seen trailing behind the more conventional barrel/breech interfaces that we are more used to seeing (pictured above). The rather ornate piece is a double rifle and the “Plain Jane” is a drilling.

--------------------
Happy the man, and happy he alone,
He who can call today his own:
He who, secure within, can say,
Tomorrow do thy worst, for I have lived today.

- John Dryden

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Patent Brenneke Drilling - Engraving	Buchsemann	28/01/09 11:49 AM
Re: Patent Brenneke Drilling - Engraving	mehulkamdar	28/01/09 12:28 PM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	28/01/09 01:55 PM
Re: Patent Brenneke Drilling - Engraving	mehulkamdar	11/03/09 06:55 AM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	11/03/09 02:44 PM
Re: Patent Brenneke Drilling - Engraving	fuhrmann	11/03/09 06:25 PM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	12/03/09 01:44 AM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	12/03/09 04:21 AM
Re: Patent Brenneke Drilling - Engraving	fuhrmann	16/02/09 08:19 PM
Re: Patent Brenneke Drilling - Engraving	93mouse	16/02/09 11:18 PM
Re: Patent Brenneke Drilling - Engraving	CptCurl	17/02/09 12:06 AM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	17/02/09 04:26 AM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	17/02/09 05:41 AM
Re: Patent Brenneke Drilling - Engraving	fuhrmann	17/02/09 07:42 AM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	17/02/09 09:45 AM
Re: Patent Brenneke Drilling - Engraving	93mouse	17/02/09 07:06 PM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	18/02/09 06:25 AM
Re: Patent Brenneke Drilling - Engraving	Buchsemann	19/02/09 08:01 AM
Re: Patent Brenneke Drilling - Engraving	mehulkamdar	25/02/09 12:38 PM

Extra information

0 registered and 329 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13359

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved