Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Musket Cap/Nipple: higher pressure?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

DarylS
.700 member

Reged: 10/08/05
Posts: 27009
Loc: Beautiful British Columbia, Ca...

Re: Musket Cap/Nipple: higher pressure?
08/03/09 08:22 AM

Only one thing you could do, is to use the nipples that allow the hammer strike them squarly. Trackofthewolf has about all the nipples necessary to get a good fit. Nipples that are too short for Pedersoli's design might cause the hammer's anvil to strike at an angle, ie: the fornt of the nipple or the rear, not squarely on the circle. That is not good. If striking at the front, it will direct gas and cap fragments to the rear. If at the rar, it will direct gasses forward, which is not bad in itself, but the rear of the nipple will pean from hammer blows and make caps stick.

Personally, I'd use a short a nipple as possible, even a pistol nipple so the fences would be operational and replace those stock hammers with a English designed hammer of the correct 'throw' for that short nipple.

Note the hammers available at Trackofthewold - everyone has a catolog, don't they? In the catolog, the pictures are full scale(size). Measure the throw needed on your gun, then find a muzzleloading hammer of the proper throw.

To find the proper throw, you measure from the centre of the hammer's screw (centre of the screw) to the centre of the nipple. That is the throw. Match it up and you are away. You might even find a true English design that is the correct throw. Some are engraved, some aren't. The Alex Henry (I think it was) is a nice design with a long nose to curl around the fence, the way they are supposed to fit. You might get lucky.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Musket Cap/Nipple: higher pressure?	bp72double	28/02/09 02:45 PM
Re: Musket Cap/Nipple: higher pressure?	Tatume	28/02/09 11:53 PM
Re: Musket Cap/Nipple: higher pressure?	Dphariss	09/03/09 08:30 AM
Re: Musket Cap/Nipple: higher pressure?	DarylS	09/03/09 09:21 AM
Re: Musket Cap/Nipple: higher pressure?	gapgar	10/03/09 07:34 AM
Re: Musket Cap/Nipple: higher pressure?	Kaimiloa	13/03/09 05:24 PM
Re: Musket Cap/Nipple: higher pressure?	Kaimiloa	14/03/09 01:44 AM
Re: Musket Cap/Nipple: higher pressure?	DarylS	14/03/09 03:42 AM
Re: Musket Cap/Nipple: higher pressure?	bp72double	01/03/09 02:23 AM
Re: Musket Cap/Nipple: higher pressure?	DarylS	01/03/09 02:25 PM
Re: Musket Cap/Nipple: higher pressure?	bp72double	01/03/09 04:36 PM
Re: Musket Cap/Nipple: higher pressure?	DarylS	02/03/09 04:37 AM
Re: Musket Cap/Nipple: higher pressure?	David_P	03/03/09 11:38 PM
Re: Musket Cap/Nipple: higher pressure?	gapgar	07/03/09 06:20 PM
Re: Musket Cap/Nipple: higher pressure?	DarylS	08/03/09 08:22 AM

Extra information

0 registered and 1 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5357

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved