Home | Ezine | Forums | Links | Contact
NitroExpress.com: Cordite equivalent - WARNING re IMR3031

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Marrakai
.416 member


Reged: 09/01/03
Posts: 3563
Loc: Darwin, Top End of Australia
Re: Cordite equivalent
      26/02/09 10:45 PM

Just remember, guys, IMR3031 has been a bit suspect over the years for producing pressure hikes in nitro-express cartridges. Back when that was all there was, it was used extensively, but there are much better powders around these days and its use in NE-equivalent loading should probably be discouraged.

Heresay only, I have never used it personally, but through a gunsmith mate, Vic P_, I know of several nice doubles taken off the face by use of that powder.

Another point to remember is that cordite was OK a hundred years ago when it was the only game in town, but today we can use considerably slower powders for better ballistics, or the same ballistics at much lower pressure.

Remember too that Reloader powders in full nitro loads need wads or filler, a two-edged sword if ever there was one.....

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Cordite equivalent - WARNING re IMR3031 fraserdouble 25/02/09 10:27 PM
. * * Re: Cordite equivalent grandveneur   26/02/09 03:11 AM
. * * Re: Cordite equivalent Marrakai   26/02/09 10:45 PM
. * * Re: Cordite equivalent bonanza   29/06/10 09:35 PM
. * * Re: Cordite equivalent DarylS   30/06/10 12:45 AM
. * * Re: Cordite equivalent grandveneur   30/06/10 06:40 PM
. * * Re: Cordite equivalent mauserand9mm   01/07/10 10:22 AM
. * * Re: Cordite equivalent grandveneur   01/07/10 03:23 PM
. * * Re: Cordite equivalent grandveneur   29/06/10 06:17 PM
. * * Re: Cordite equivalent Ron_Vella   29/06/10 08:47 PM
. * * Re: Cordite equivalent beleg2   29/06/10 08:59 PM
. * * Re: Cordite equivalent - WARNING re IMR3031 NitroXAdministrator   29/06/10 08:55 PM
. * * Re: Cordite equivalent doubleriflenut   26/02/09 02:53 AM

Extra information
0 registered and 90 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12973

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved