Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: NFB loads in a Damascus rifle barrels.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

JPK
.375 member

Reged: 31/08/04
Posts: 734
Loc: Chevy Chase, MD

Re: NFB loads in a Damascus rifle barrels.
07/02/09 01:54 PM

Sherman Bell did considerable testing on NFB vs. BP loads and his test, most of which relied on strain gauges, but some of which relied piezo transducers, iirc, proved out that NFB loads produced less peak stress. Also iirc, choice of primer was important, with too hot of a primer causing a less than critical, less than BP peak, but notable spike in the early phase of ignition. You can read his results since he published them in an article in Double Gun Journal.

On damascus barrels, he tested to failure a whole bunch of damascus guns and some early and later fluid steel barrels. These were all shotguns, iirc, and the damascus generally faired better than the fluid steel. Often, the action was giving away and ribs seperated while the barrels hung in there, some bulging. Some of the guns' actions or barrles were in pretty poor shape to begin with, and none was pristine (as you might imagine for a test to failure project), and he was using modern SAAMI proof matching loads. When he could, he continued shooting til a bearrel blew, some did, but other times the action failed first. You can also read of these tests and results in Double Guns Journal.

Prior to reading his test, I figured that if the barrels of a shotgun or rifle looked alright and checked out all right for proof dimensions, etc, with a good gunsmith, I'd try them with a lanyard and NFB. After reading his tests, I'd use them without hesitation if the passed, say, JJ's inspection, just the same as vintage fluid steel barrels.

JPK

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
NFB loads in a Damascus rifle barrels.	bonanza	06/02/09 05:35 AM
Re: NFB loads in a Damascus rifle barrels.	bpesteve	09/02/09 03:32 AM
Re: NFB loads in a Damascus rifle barrels.	peter	06/02/09 06:13 AM
Re: NFB loads in a Damascus rifle barrels.	DarylS	06/02/09 06:40 AM
Re: NFB loads in a Damascus rifle barrels.	Bramble	06/02/09 01:10 PM
Re: NFB loads in a Damascus rifle barrels.	Marrakai	06/02/09 01:41 PM
Re: NFB loads in a Damascus rifle barrels.	CptCurl	06/02/09 02:01 PM
Re: NFB loads in a Damascus rifle barrels.	JPK	07/02/09 01:54 PM
Re: NFB loads in a Damascus rifle barrels.	450_EXPRESS	08/02/09 08:52 AM
Re: NFB loads in a Damascus rifle barrels.	JPK	08/02/09 12:00 PM
Re: NFB loads in a Damascus rifle barrels.	1980E26	07/02/09 03:16 PM
Re: NFB loads in a Damascus rifle barrels.	MacNaughton360	06/02/09 06:09 AM
Re: NFB loads in a Damascus rifle barrels.	CptCurl	06/02/09 06:05 AM

Extra information

0 registered and 357 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4432

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved