Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Oberndorf Type A Mauser in a Hogue overmolded stock?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

eagle27
.400 member

Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...

Re: Oberndorf Type A Mauser in a Hogue overmolded stock?
30/01/09 08:21 AM

Nice Type A Pattern No1 you have there Rustam.
I have same in .404 Jeffery (standard length action opened up from original 10.75x68) and planned to put it into an off the shelf Mauser M98 synthetic stock.

I would have had to open up the mag space and the barrel channel in the plastic fantastic to take the .404J magazine box and larger barrel contour. Other than that everything else lined up. In the end I just didn't like the look of plastic.
Some time in the future I will probably have another nice stock made in walnut and keep the original Mauser factory stock as is.

These rifles are made to hunt and I have committed the "cardinal sin" so to speak, of drilling and tapping for a Weaver bridge mount from the receiver to the rear of the multi leaf safari sight (exactly same height - no packers required). Originally for a green dot sight but now a Leupold 2x extended eye relief scope in low Weaver rings sits in place. Fantastic to use with both eyes open, and can be quickly removed to use the open sights straight down the centre of the mount if required. The great Pondoro Taylor would even approve as he suggested the very same set up in his African Rifles & Cartridges book.

In short, your standard action should fit into any of the stocks made for the M98 Mauser.

Cheers.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	29/01/09 04:11 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	vol423	29/01/09 09:21 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	29/01/09 12:52 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	eagle27	30/01/09 08:21 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	30/01/09 03:08 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	eagle27	30/01/09 04:39 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	30/01/09 06:11 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	pjotr	02/02/09 05:29 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	03/02/09 12:31 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	Rancid_Crabtree	19/02/09 06:37 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	20/02/09 02:23 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	Rancid_Crabtree	20/02/09 10:38 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	23/02/09 01:03 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	Rancid_Crabtree	26/02/09 04:09 PM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	MarinePMI	27/02/09 07:50 AM
Re: Oberndorf Type A Mauser in a Hogue overmolded stock?	RHB	27/02/09 12:04 PM

Extra information

1 registered and 17 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6827

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved