Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Crackers for the 9.5

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 26499
Loc: Beautiful British Columbia, Ca...

Re: Crackers for the 9.5
29/01/09 02:36 AM

Good point about stock issues in thin stocks - a proper glass bedding may be in order if this is an issue.
Couple methods I use on heavy kickers is to relieve the recoil lug area to allow a thin, 1/8" steel plate to be glass bedded in that area, side to side and top of the recoil plate to bottom. I cross-hatch the rear of the plate to get a good bond against the wood - even to drilling holes through it. Another method is to cut a groove across the top of recoil plate's wood in the stock, and set in glass, crosswise, a section of threaded rod (piece fo screw or screw stock) about 10x24 thread. This would be 1/2 way behind the recoil face there the action's recoil lug, then the action's recoil area is bed to the action in normal fashion. The rear tang is also bed in glass & can be relieved at the rear, or not, as if bed properly, the action cannot move back to split the tang. The only way a tang can split,is if the action moves under recoil - properly bed, there is no movement.

If there is a steel tube runing top to bottom at the rear gaurd screww, it should be removed as it can be a stock splitter if not solidly bed. If it is roughed up and classed into the rear screw hold in the same manner as a pillar bedded device, it is OK to leave. Antoher way is to gring the steel tube down to be below both top and bottom wood surfaces if one wishes to leave it, but it is not needed in that area. Both screws should not touch any surface, front, sides or rear for best accuracy. To avoid wood compression, glass bedding top and bottom cures that possibility.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Crackers for the 9.5	Marrakai	25/01/09 02:31 AM
Re: Crackers for the 9.5	peter	25/01/09 04:01 AM
Re: Crackers for the 9.5	DarylS	25/01/09 08:34 AM
Re: Crackers for the 9.5	9.3x57	25/01/09 01:13 PM
Re: Crackers for the 9.5	Marrakai	25/01/09 11:26 PM
Re: Crackers for the 9.5	9.3x57	26/01/09 01:26 AM
Re: Crackers for the 9.5	DarylS	26/01/09 06:11 AM
Re: Crackers for the 9.5	DarylS	26/01/09 07:28 AM
Re: Crackers for the 9.5	bpesteve	26/01/09 03:03 PM
Re: Crackers for the 9.5	9.3x57	26/01/09 03:29 PM
Re: Crackers for the 9.5	Marrakai	27/01/09 01:02 AM
Re: Crackers for the 9.5	9.3x57	27/01/09 01:07 AM
Re: Crackers for the 9.5	DarylS	27/01/09 02:34 AM
Re: Crackers for the 9.5	ChrisPer	28/01/09 12:01 AM
Re: Crackers for the 9.5	bpesteve	28/01/09 03:52 AM
Re: Crackers for the 9.5	DarylS	28/01/09 04:28 AM
Re: Crackers for the 9.5	kamilaroi	28/01/09 08:42 AM
Re: Crackers for the 9.5	Marrakai	28/01/09 02:39 PM
Re: Crackers for the 9.5	kamilaroi	28/01/09 05:25 PM
Re: Crackers for the 9.5	DarylS	29/01/09 02:36 AM
Re: Crackers for the 9.5	Marrakai	29/01/09 02:18 PM
Re: Crackers for the 9.5	ChrisPer	29/01/09 07:35 PM
Re: Crackers for the 9.5	DarylS	30/01/09 01:54 AM
Re: Crackers for the 9.5	Marrakai	09/02/09 01:25 AM
Re: Crackers for the 9.5	DarylS	09/02/09 03:07 AM
Re: Crackers for the 9.5	Kiwi_bloke	02/04/10 08:24 PM
Re: Crackers for the 9.5	Marrakai	09/02/09 02:37 PM
Re: Crackers for the 9.5	9.3x57	09/02/09 03:04 PM
Re: Crackers for the 9.5	Marrakai	14/02/09 07:50 PM
Re: Crackers for the 9.5	DarylS	07/03/10 01:07 AM
Re: Crackers for the 9.5	Marrakai	08/03/09 11:22 PM
Re: Crackers for the 9.5	DarylS	09/03/09 03:13 AM
Re: Crackers for the 9.5	GG375	10/03/09 09:51 PM
Re: Crackers for the 9.5	kuduae	18/01/10 06:19 AM
Re: Crackers for the 9.5	xausa	18/01/10 09:16 AM
Re: Crackers for the 9.5	kuduae	18/01/10 10:38 AM
Re: Crackers for the 9.5	Sarg	18/01/10 10:14 PM
Re: Crackers for the 9.5	kuduae	19/01/10 08:32 AM
Re: Crackers for the 9.5	lawndart	06/03/10 04:19 PM
Re: Crackers for the 9.5	Sarg	18/01/10 08:29 AM
Re: Crackers for the 9.5	lancaster	18/01/10 06:37 AM

Extra information

0 registered and 48 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 22101

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved