Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 16 Bore Husky Model 17?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 26975
Loc: Beautiful British Columbia, Ca...

Re: 16 Bore Husky Model 17?
24/01/09 04:03 AM

Lancaster - That is a fancy gun compared to mine. I wonder what model mine is? Is it a 1-off early M17 due to the oversized 16 bore rifled barrel and the straight stock? The chamber is full length, not a short one and will allow a plastic 2 1/2" case with a .684" round ball seated on top easily, withough touching the throat. The loads I used with 2.45" brass and ball seated 1/2 way in, have a bit of a jump to hit the throat and rifling - this is a pressure reducer & didn't seem to hurt the accuracy. I don't suppose it has much value over being a 'wierd' gun, but is a shooter. I've thought of relieving the left barrel's full choke to allow better patterns, but suppose I should shoot it first. heh,heh. I plan on using it for the BP ctg. gun trap shooting at Hefley Creek Rendezvous next August. A nice modified pattern would be great. Adjusting the handloads will do that for me. I also thought of reducing the barrels to 24" and installing rifle sights - am resisting that so far.

Actually, the straight rifled tube is a 13 bore on the grooves (.703") and a tight 15 (loose 16) on the bore(.671"). I have some 14 bore wads on-order for it at .703" diameter. I thought the .720" wads for the 13 bore might be a bit tight getting into the cases. I'd rather not have to bell the case mouths to seat the wads. I expect compression of the fibre wads upon ignition will tighten them up a bit & seal just fine. I ordered the fiber wads lubed. The undersized fibers I hand lubed and tried along with the single & double oversize 1/16" card wad seemed to work OK so far.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
16 Bore Husky Model 17?	DarylS	20/01/09 06:57 AM
Re: 16 Bore Husky Model 17?	rigbymauser	20/01/09 07:34 AM
Re: 16 Bore Husky Model 17?	Der_Jaeger	20/01/09 07:56 AM
Re: 16 Bore Husky Model 17?	DarylS	26/01/09 07:37 AM
Re: 16 Bore Husky Model 17?	DarylS	09/03/09 05:39 AM
Re: 16 Bore Husky Model 17?	lancaster	09/03/09 06:39 PM
Re: 16 Bore Husky Model 17?	lancaster	09/03/09 10:40 PM
Re: 16 Bore Husky Model 17?	DarylS	10/03/09 01:09 AM
Re: 16 Bore Husky Model 17?	DarylS	12/03/09 04:25 AM
Re: 16 Bore Husky Model 17?	DarylS	09/07/09 05:11 AM
Re: 16 Bore Husky Model 17?	450_366	09/07/09 07:44 AM
Re: 16 Bore Husky Model 17?	DarylS	10/07/09 12:04 AM
Re: 16 Bore Husky Model 17?	beleg2	20/01/09 08:26 AM
Re: 16 Bore Husky Model 17?	88MauSporter	20/01/09 08:38 AM
Re: 16 Bore Husky Model 17?	DarylS	20/01/09 10:20 AM
Re: 16 Bore Husky Model 17?	bonanza	20/01/09 10:28 AM
Re: 16 Bore Husky Model 17?	Omnivorous_Bob	20/01/09 03:08 PM
Re: 16 Bore Husky Model 17?	lancaster	20/01/09 07:41 PM
Re: 16 Bore Husky Model 17?	DarylS	21/01/09 07:46 AM
Re: 16 Bore Husky Model 17?	lancaster	21/01/09 05:57 PM
Re: 16 Bore Husky Model 17?	450_366	21/01/09 08:30 AM
Re: 16 Bore Husky Model 17?	DarylS	21/01/09 11:53 AM
Re: 16 Bore Husky Model 17?	rigbymauser	21/01/09 08:02 PM
Re: 16 Bore Husky Model 17?	DarylS	22/01/09 03:43 AM
Re: 16 Bore Husky Model 17?	450_366	22/01/09 05:15 AM
Re: 16 Bore Husky Model 17?	88MauSporter	23/01/09 02:34 PM
Re: 16 Bore Husky Model 17?	lancaster	24/01/09 12:25 AM
Re: 16 Bore Husky Model 17?	DarylS	24/01/09 04:03 AM

Extra information

0 registered and 22 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11646

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved