Home | Ezine | Forums | Links | Contact
NitroExpress.com: building on a Brno 21H?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

farshot
.300 member


Reged: 25/01/06
Posts: 106
Loc: Alberta Canada
Re: building on a Brno 21H?
      21/01/09 08:03 AM

Johan is correct -- the 10x68 would be pushing the limits of size in that action - which is really a small ring mauser type action.

I have seen wonderful custom rifles based on the BRNO "21" in 30-06 and using the original stock, which for such a light rifle must bite a little bit. BRNO 21 traditionally have long throats that allow a 8mm bullet to be seated quite far out and one can get very nice velocities out of them. I find that when loaded heavy they tend to kick a little - but they are wonderful "carry for a long time to shoot once" rifles.

I have found that the BRNO ZG-47 magazines a a few millimters longer then the 21 or Mauser 98's and the ZG-47 (a large ring) were used by BRNO in the 10.75x68. ZG-47 make a better platform for larger rounds for those two reasons.

and by the way -- if you are selling that old stock - give me a pm here in Canada please

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* building on a Brno 21H? 3006swift 20/01/09 08:26 PM
. * * Re: building on a Brno 21H? Yochanan   21/01/09 02:22 AM
. * * Re: building on a Brno 21H? 9.3x57   21/01/09 03:59 AM
. * * Re: building on a Brno 21H? farshot   21/01/09 08:03 AM
. * * Re: building on a Brno 21H? 450_366   21/01/09 08:34 AM
. * * Re: building on a Brno 21H? 3006swift   21/01/09 07:50 PM

Extra information
1 registered and 247 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3973

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved