Home | Ezine | Forums | Links | Contact
NitroExpress.com: .577 2-3/4" barrel shank diameter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Bramble
.375 member


Reged: 29/07/06
Posts: 950
Loc: England
Re: .577 2-3/4" barrel shank diameter
      19/01/09 05:13 AM

Glenn.

No, cut the threads with a 55 degree tool, but cut them a little short of full depth, so that the thread starts but makes just makes a tight 1-1 1/2 full revolutions. Then apply the paste and lap in til the barrel nips up. If you don't want to grind the tool I believe that Brownells stock one.

Regards

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .577 2-3/4" barrel shank diameter Glenn_Fewless 18/01/09 04:44 AM
. * * Re: .577 2-3/4" barrel shank diameter peter   18/01/09 06:04 AM
. * * Re: .577 2-3/4" barrel shank diameter Bramble   18/01/09 06:18 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   18/01/09 09:38 AM
. * * Re: .577 2-3/4" barrel shank diameter Bramble   18/01/09 11:23 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   18/01/09 12:46 PM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   19/01/09 01:14 AM
. * * Re: .577 2-3/4" barrel shank diameter Bramble   19/01/09 05:13 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   19/01/09 05:44 AM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   20/01/09 05:19 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   20/01/09 08:46 AM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   21/01/09 05:22 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   21/01/09 07:52 AM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   22/01/09 04:56 AM

Extra information
0 registered and 167 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5515

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved