Home | Ezine | Forums | Links | Contact
NitroExpress.com: Recommended loading die set for 9.3x57?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

88MauSporter
.375 member


Reged: 06/06/07
Posts: 530
Loc: Alaska / Texas
Re: Recommended loading die set for 9.3x57?
      09/01/09 12:31 PM

I would buy the Hornady. I have and use this one. The RCBS is just as good, but usually more expensive. I have several CH4D dies. Most work well. I have had burrs in one die that should not have been. I would not pass up the CH4D if it was significantly less expensive. They have always corrected any issue for me.
Welcome to the 9.3X57 fan club. I will look to pick mine up after finally having the scoping and swing safety put on. Maybe tomorrow. I have two, but the 1898 action rifle will eventually end up as a 9,3x62 as soon as I can find a smith to do the job.
Best wishes.

--------------------
"A hunter should not use a rifle that will kill an animal when everthing goes right; you should use one that will do the job when everything goes wrong." 88MauSporter

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Recommended loading die set for 9.3x57? akriet 09/01/09 11:55 AM
. * * Re: Recommended loading die set for 9.3x57? LarrysGrip   21/01/09 12:03 PM
. * * Re: Recommended loading die set for 9.3x57? bpesteve   28/01/09 04:19 PM
. * * Re: Recommended loading die set for 9.3x57? LarrysGrip   29/01/09 12:29 AM
. * * Re: Recommended loading die set for 9.3x57? DarylS   29/01/09 02:01 AM
. * * Re: Recommended loading die set for 9.3x57? 88MauSporter   09/01/09 12:31 PM
. * * Re: Recommended loading die set for 9.3x57? 9.3x57   09/01/09 01:14 PM
. * * Re: Recommended loading die set for 9.3x57? GSP7   09/01/09 01:18 PM
. * * Re: Recommended loading die set for 9.3x57? bpesteve   09/01/09 02:24 PM

Extra information
0 registered and 43 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4857

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved