Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Sauer + Miller & Val Greiss drillings

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

kcordell
.275 member

Reged: 06/01/08
Posts: 78
Loc: Deep South

Re: Sauer + Miller & Val Greiss drillings
27/12/08 04:17 PM

Steve,

Hey, thanks for the above post. Glad you are trying to load for yours. I have not had mine for about 8 months as it is at my gunsmiths getting a set of new springs.

Per the load, Steve Meyer, read awesome guy, of the GGCA emailed me with the following data:

-The 11,15x65R (also noted as 11,15x65,4R) cartridge is an elongated version of the German military 11,15x60R (.43) Mauser round. The .43 Mauser spawned dozens of sporting cartridges of various calibers and lengths and the 65mm version was fairly popular.

-The 62/78 indicates the gauge of the rifle barrel and is usually all that's seen to give any clue as to the chambering - having the explicit "patr(one)" (cartridge) mark is rare. Still, a chamber cast wouldn't hurt. 62.78 gauge translates into .420", which would be the largest diameter rod, in .010" increments, that would fit in the bore. Groove diameter of your rifle barrel will probably be somewhere between .440-.448"

-It was loaded with black powder (SP = schwartze pulver) and the bullet weight was 17,7 grams (about 273 grains) and plain lead (BL = Blei, or lead).

Hope this helps. Let me know if you find a good load and how it works!

Enjoy,

KC

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Sauer + Miller & Val Greiss drillings	kcordell	18/04/08 01:08 PM
Re: Sauer + Miller & Val Greiss drillings	SteveG	20/11/08 04:50 AM
Re: Sauer + Miller & Val Greiss drillings	kcordell	27/12/08 04:17 PM
Re: Sauer + Miller & Val Greiss drillings	SteveG	17/01/09 06:50 AM
Re: Sauer + Miller & Val Greiss drillings DELETED	luv2safari	18/04/08 03:55 PM
Re:Sauer + Miller & Val Greiss drillings	88MauSporter	18/04/08 11:05 PM
Re: Sauer + Miller & Val Greiss drillings	kcordell	18/04/08 11:20 PM
Sauer + Miller & Greis drillings	NitroX	19/04/08 02:31 AM
Re: Sauer + Miller & Greiss drillings	kcordell	19/04/08 02:34 AM
Re: Sauer + Miller & Greiss drillings	kcordell	19/04/08 05:08 AM
Re: Sauer + Miller & Greiss drillings	Nakihunter	19/04/08 12:34 PM
Re: Sauer + Miller & Greiss drillings	kcordell	19/04/08 10:17 PM
Re: Sauer + Miller & Greiss drillings	mehulkamdar	20/04/08 12:25 AM
Re: Sauer + Miller & Greiss drillings	kcordell	21/04/08 01:55 PM
Re: Sauer + Miller & Greiss drillings	dale	24/04/08 06:38 PM
Re: Sauer + Miller & Greiss drillings	heers68	19/04/08 10:47 PM

Extra information

0 registered and 124 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14530

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved