Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: cast bullets

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 27682
Loc: Beautiful British Columbia, Ca...

Re: cast bullets
09/12/08 04:44 PM

Saskguy - the first thing to do is to slug your bore to find the bore and more importantly, the groove diameter. With luck you may find easy to procure moulds will be available from RCBS or Lyman.
If a custom mould is necessary, I'd first look to LBT moulds made by Veral Smith. Do a google if necessary. If a custom mould is necessary, lookhim up. The reason I prefer him as the mould will cast the diameter he says it will, from the alloy you specify. If you buy form NEI, you'll be taking a chance with a mould you probably cannot return. LBT moulds cost about the same or a bit less than most other custom moulds. RCBS has a fairly good line of various sized .40 cal moulds.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
cast bullets	Saskguy	08/12/08 04:21 AM
Re: cast bullets	Bill_Cooley	08/12/08 02:47 PM
Re: cast bullets	TedH	09/12/08 12:16 PM
Re: cast bullets	9.3x57	10/12/08 12:57 AM
Re: cast bullets	TedH	10/12/08 03:16 AM
Re: cast bullets	Tatume	10/12/08 04:14 AM
Re: cast bullets	Saskguy	10/12/08 02:05 PM
Re: cast bullets	DarylS	11/12/08 02:29 AM
Re: cast bullets	Saskguy	09/12/08 04:32 PM
Re: cast bullets	DarylS	09/12/08 04:44 PM

Extra information

0 registered and 68 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3529

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact