Home | Ezine | Forums | Links | Contact
NitroExpress.com: Sucky Ruger rings

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Kalunga
.333 member


Reged: 16/06/06
Posts: 328
Loc: Germany
Re: Sucky Ruger rings
      02/12/08 06:23 AM

Yes I once had a Ruger No.1 in 7x57 on which a very bad gunsmith put the scope I delivered in Leopold rings. First I hated them because they were much too high for the 40 mm objective but they also came loose very quickly.
My very first rifle though was a Ruger No.1 in .338 Win. Mag. but the scope was mounted with Tasco rings, "Made in Japan" and they fitted perfectly and never got loose !
So I guess the problem is bad tolerances in producing the rings. Now I use EAW or Recknagel mounts and rings exclusively and never had problems again (if the gunsmith does his job well).

Kalunga

Wicked good hunting !!!

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Sucky Ruger rings DoubleD 02/12/08 03:18 AM
. * * Re: Sucky Ruger rings 4seventy   02/12/08 03:44 PM
. * * Re: Sucky Ruger rings DoubleD   02/12/08 04:03 PM
. * * Re: Sucky Ruger rings 4seventy   02/12/08 06:24 PM
. * * Re: Sucky Ruger rings DoubleD   03/12/08 12:12 AM
. * * Re: Sucky Ruger rings 9.3x57   03/12/08 01:32 AM
. * * Re: Sucky Ruger rings DoubleD   03/12/08 03:08 AM
. * * Re: Sucky Ruger rings Kalunga   02/12/08 06:23 AM
. * * Re: Sucky Ruger rings Con   02/12/08 10:15 AM
. * * Re: Sucky Ruger rings tophet1   02/12/08 10:18 AM
. * * Re: Sucky Ruger rings Tatume   02/12/08 10:29 AM
. * * Re: Sucky Ruger rings 9.3x57   02/12/08 01:21 PM

Extra information
1 registered and 42 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3612

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved