Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Pre-Threaded M98 Lothar Walther barrels.

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Bramble
.375 member

Reged: 29/07/06
Posts: 950
Loc: England

Re: Pre-Threaded M98 Lothar Walther barrels.
28/10/08 10:39 AM

Mauser threads are 55 degree. Starman you don't give your location, it would help,. If you are in the US you need to be carefull if the rifle has previously had a replacment barrel fitted in the states as it is common practice to chase the threads to 60 degrees.

I would suggest that you take a half circle wax casting and check the angle if this is the case before you order.
It may not make a lot of difference if you nip the barrel up slightly over tight (100 Lbsft.)

A pre threaded barrel is not necessarily a spin on fit, you need to make sure that it bottoms on both the primary and secondary shoulder evenly.
As long as you spot that in right and torque it up. then you will get a no wobble fit irrispective of a little thread tollerence.

Regards

Post Extras

Entire topic
Subject	Posted by	Posted on
Pre-Threaded M98 Lothar Walther barrels.	starman	28/09/08 07:38 PM
Re: Pre-Threaded M98 Lothar Walther barrels.	kamilaroi	28/09/08 08:45 PM
Re: Pre-Threaded M98 Lothar Walther barrels.	lancaster	30/09/08 04:40 AM
Re: Pre-Threaded M98 Lothar Walther barrels.	peter	30/09/08 04:56 AM
Re: Pre-Threaded M98 Lothar Walther barrels.	Rolf	28/10/08 07:43 AM
Re: Pre-Threaded M98 Lothar Walther barrels.	Bramble	28/10/08 10:39 AM

Extra information

2 registered and 75 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3743

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact