Quote:

---

I have never attempted to make cases for that cartridge, but the dimensions that I have for it suggest that it would not be all that difficult to do.
Maybe the dimensions I have are incorrect.

What base diameter measurement do you have for the .240 Flanged?

---

You are correct, I had it backwards! the head would have to be swaged down, a much better choice, but would require anealing in that area, I'm sure, but doable. The 9.3X74R head dia is .465[/COLOR]




H&H 240 flanged
.........case type rimmed B/N

.........case length 2.496

.........case head dia .448

.........rim dia .513

.........neck dia .274

.........neck length .345

.........shoulder lgth .163

.........body angle(dgs/side) .736

........loaded lgth 3.25

........rim thickness .06

........shoulder dia .402

........lgnth to shoulder 1.988

........sholder angle (deg) 21.44

........case capacity grs water 57.63

--------------------
..........Mac >>>===(x)===>
DUGABOY1, and MacD37 founding member of DRSS www.doublerifleshooterssociety.com
"If I die today, I have had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"

Post Extras