Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Looking for .620" roundball

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

CowboyCS
.333 member

Reged: 05/10/07
Posts: 386
Loc: Kansas u.S.A.

Re: Looking for .620" roundball
29/07/08 11:20 AM

.010" extra opening across the sprue really isn't going to amount to much in a cartridge gun, not enough that you could notice it in the real world. But hey to each his own, some may want that perfection on paper thing. I'm more of a real world performance kinda guy. I have built a few absolute tack driving bolt guns, things that even shocked me because of there performance, but when you take it off the bench and start adding in all the real world hunting factors it shoots no better than the control you can muster with your prey in your sights under field conditions. So to me the difference of a flat spot were the sprue cut a little deeper wouldn't matter much to me in a hunting rifle, in a bench gun I would probably care. Truth is that flat across the sprue probably wouldn't bother me in a muzzleloader either, due to the fact that the ball is gonna spin to CoG anyways with or without the sprue protruding or a flat spot on it as long as it isn't loaded with the flat spot turned into the rifling.
That's all just my opinion and worth what you paid for it and hey I've been proven wrong before.

C

--------------------
The Bill of Rights- Void were prohibited by law
Stolzer & Son's Gunsmithing

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Looking for .620" roundball	tinker	26/07/08 03:55 AM
Re: Looking for .620" roundball	450_Ackley	26/07/08 03:37 PM
Re: Looking for .620" roundball	tinker	26/07/08 03:50 PM
Re: Looking for .620" roundball	DarylS	27/07/08 12:28 AM
Re: Looking for .620" roundball	450_Ackley	28/07/08 05:27 PM
Re: Looking for .620" roundball	tinker	29/07/08 05:04 AM
Re: Looking for .620" roundball	CowboyCS	29/07/08 08:13 AM
Re: Looking for .620" roundball	tinker	29/07/08 01:40 PM
Re: Looking for .620" roundball	CowboyCS	29/07/08 02:55 PM
Re: Looking for .620" roundball	tinker	29/07/08 03:25 PM
Re: Looking for .620" roundball	DarylS	30/07/08 12:34 AM
Re: Looking for .620" roundball	Bramble	30/07/08 08:58 AM
Re: Looking for .620" roundball	DarylS	29/07/08 10:54 AM
Re: Looking for .620" roundball	CowboyCS	29/07/08 11:20 AM
Re: Looking for .620" roundball	DarylS	26/07/08 11:14 AM

Extra information

0 registered and 68 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4800

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved