Home | Ezine | Forums | Links | Contact
NitroExpress.com: 8X64S

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
8X64S
      12/07/08 07:54 AM

I have a nice Husqvarna commercial (.30-'06 length) M98 in 8X57IS which I would like to have rechambered to 8X64S. The drawings I have of the two cartridges from an authoritative German source (DEVA) shows that the neck diameter of the 8X57IS is slightly larger that that of the 8X64S, so there is some question in my mind as to whether the 8X64S reamer will clean the old chamber up.

Since the distance from the base to the neck of the 8X64S is 55.51mm and the 8X57 case is (naturally) 57mm long, at most only 1.49mm (.0586")of the neck would be oversized, and then only by .12mm (.0047"), the difference between 8.96mm and 9.08mm. (.3527" and .3574")

Since the 8X60S has a 8.99mm neck, and it was specifically designed to convert 8X57IS rifles from the forbidden military caliber to a larger legal cartridge, it does not seem that this alteration would be a problem.

Has anyone had any experience with this conversion?

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 8X64S xausa 12/07/08 07:54 AM
. * * Re: 8X64S tinker   12/07/08 09:57 AM
. * * Re: 8X64S xausa   12/07/08 10:26 AM
. * * Re: 8X64S tinker   13/07/08 04:36 AM
. * * Re: 8X64S shinz   13/07/08 10:13 AM
. * * Re: 8X64S Nakihunter   13/07/08 09:23 PM
. * * Re: 8X64S xausa   29/07/08 05:48 AM
. * * Re: 8X64S farshot   28/08/08 04:12 AM
. * * Re: 8X64S xausa   28/08/08 05:47 AM
. * * Re: 8X64S farshot   29/08/08 12:35 AM
. * * Re: 8X64S Yochanan   29/08/08 02:10 AM
. * * Re: 8X64S xausa   29/08/08 05:52 AM
. * * Re: 8X64S farshot   31/08/08 04:18 AM

Extra information
2 registered and 37 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9691

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved